libburn 1.1.4
libburn.h
Go to the documentation of this file.
00001 /* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
00002 
00003 /* Copyright (c) 2004 - 2006 Derek Foreman, Ben Jansens
00004    Copyright (c) 2006 - 2011 Thomas Schmitt <scdbackup@gmx.net>
00005    Provided under GPL version 2 or later.
00006 
00007    This is the official API definition of libburn.
00008 
00009 */
00010 /* Important: If you add a public API function then add its name to file
00011                  libburn/libburn.ver
00012 */
00013 
00014 
00015 #ifndef LIBBURN_H
00016 #define LIBBURN_H
00017 
00018 /* 
00019 
00020 Applications must use 64 bit off_t. E.g. by defining
00021   #define _LARGEFILE_SOURCE
00022   #define _FILE_OFFSET_BITS 64
00023 or take special precautions to interface with the library by 64 bit integers
00024 where this .h files prescribe off_t.
00025 
00026 To prevent 64 bit file i/o in the library would keep the application from
00027 processing tracks of more than 2 GB size.
00028 
00029 */
00030 #include <sys/types.h>
00031 
00032 #ifndef DOXYGEN
00033 
00034 #if defined(__cplusplus)
00035 #define BURN_BEGIN_DECLS \
00036     namespace burn { \
00037         extern "C" {
00038 #define BURN_END_DECLS \
00039         } \
00040     }
00041 #else
00042 #define BURN_BEGIN_DECLS
00043 #define BURN_END_DECLS
00044 #endif
00045 
00046 BURN_BEGIN_DECLS
00047 
00048 #endif
00049 
00050 /** References a physical drive in the system */
00051 struct burn_drive;
00052 
00053 /** References a whole disc */
00054 struct burn_disc;
00055 
00056 /** References a single session on a disc */
00057 struct burn_session;
00058 
00059 /** References a single track on a disc */
00060 struct burn_track;
00061 
00062 /* ts A61111 */
00063 /** References a set of write parameters */
00064 struct burn_write_opts;
00065 
00066 /** Session format for normal audio or data discs */
00067 #define BURN_CDROM  0
00068 /** Session format for obsolete CD-I discs */
00069 #define BURN_CDI    0x10
00070 /** Session format for CDROM-XA discs */
00071 #define BURN_CDXA   0x20
00072 
00073 #define BURN_POS_END 100
00074 
00075 /** Mask for mode bits */
00076 #define BURN_MODE_BITS 127
00077 
00078 /** Track mode - mode 0 data
00079     0 bytes of user data.  it's all 0s.  mode 0.  get it?  HAH
00080 */
00081 #define BURN_MODE0      (1 << 0)
00082 /** Track mode - mode "raw" - all 2352 bytes supplied by app
00083     FOR DATA TRACKS ONLY!
00084 */
00085 #define BURN_MODE_RAW       (1 << 1)
00086 /** Track mode - mode 1 data
00087     2048 bytes user data, and all the LEC money can buy
00088 */
00089 #define BURN_MODE1      (1 << 2)
00090 /** Track mode - mode 2 data
00091     defaults to formless, 2336 bytes of user data, unprotected
00092     | with a data form if required.
00093 */
00094 #define BURN_MODE2      (1 << 3)
00095 /** Track mode modifier - Form 1, | with MODE2 for reasonable results
00096     2048 bytes of user data, 4 bytes of subheader
00097 */
00098 #define BURN_FORM1      (1 << 4)
00099 /** Track mode modifier - Form 2, | with MODE2 for reasonable results
00100     lots of user data.  not much LEC.
00101 */
00102 #define BURN_FORM2      (1 << 5)
00103 /** Track mode - audio
00104     2352 bytes per sector.  may be | with 4ch or preemphasis.
00105     NOT TO BE CONFUSED WITH BURN_MODE_RAW
00106     Audio data must be 44100Hz 16bit stereo with no riff or other header at
00107     beginning.  Extra header data will cause pops or clicks.  Audio data should
00108     also be in little-endian byte order.  Big-endian audio data causes static.
00109 */
00110 #define BURN_AUDIO      (1 << 6)
00111 /** Track mode modifier - 4 channel audio. */
00112 #define BURN_4CH        (1 << 7)
00113 /** Track mode modifier - Digital copy permitted, can be set on any track.*/
00114 #define BURN_COPY       (1 << 8)
00115 /** Track mode modifier - 50/15uS pre-emphasis */
00116 #define BURN_PREEMPHASIS    (1 << 9)
00117 /** Input mode modifier - subcodes present packed 16 */
00118 #define BURN_SUBCODE_P16    (1 << 10)
00119 /** Input mode modifier - subcodes present packed 96 */
00120 #define BURN_SUBCODE_P96    (1 << 11)
00121 /** Input mode modifier - subcodes present raw 96 */
00122 #define BURN_SUBCODE_R96    (1 << 12)
00123 
00124 /** Possible disc writing style/modes */
00125 enum burn_write_types
00126 {
00127     /** Packet writing.
00128           currently unsupported, (for DVD Incremental Streaming use TAO)
00129     */
00130     BURN_WRITE_PACKET,
00131 
00132     /** With CD:                     Track At Once recording
00133           2s gaps between tracks, no fonky lead-ins
00134 
00135         With sequential DVD-R[W]:    Incremental Streaming
00136         With DVD+R and BD-R:         Track of open size
00137         With DVD-RAM, DVD+RW, BD-RE: Random Writeable (used sequentially)
00138         With overwriteable DVD-RW:   Rigid Restricted Overwrite 
00139     */
00140     BURN_WRITE_TAO,
00141 
00142     /** With CD:                     Session At Once
00143           Block type MUST be BURN_BLOCK_SAO
00144           ts A70122: Currently not capable of mixing data and audio tracks.
00145 
00146         With sequential DVD-R[W]:    Disc-at-once, DAO
00147           Single session, single track, fixed size mandatory, (-dvd-compat)
00148         With other DVD or BD media:  same as BURN_WRITE_TAO but may demand
00149                                      that track size is known in advance.
00150     */
00151     BURN_WRITE_SAO,
00152 
00153     /** With CD: Raw disc at once recording.
00154           all subcodes must be provided by lib or user
00155           only raw block types are supported
00156         With DVD and BD media: not supported.
00157 
00158         ts A90901: This had been disabled because its implementation
00159                    relied on code from cdrdao which is not understood
00160                    currently.
00161                    A burn run will abort with "FATAL" error message
00162                    if this mode is attempted.
00163                    @since 0.7.2
00164         ts A91016: Re-implemented according to ECMA-130 Annex A and B.
00165                    Now understood, explained and not stemming from cdrdao.
00166                    @since 0.7.4
00167     */
00168     BURN_WRITE_RAW,
00169 
00170     /** In replies this indicates that not any writing will work.
00171         As parameter for inquiries it indicates that no particular write
00172             mode shall is specified.
00173         Do not use for setting a write mode for burning. It will not work.
00174     */
00175     BURN_WRITE_NONE
00176 };
00177 
00178 /** Data format to send to the drive */
00179 enum burn_block_types
00180 {
00181     /** sync, headers, edc/ecc provided by lib/user */
00182     BURN_BLOCK_RAW0 = 1,
00183     /** sync, headers, edc/ecc and p/q subs provided by lib/user */
00184     BURN_BLOCK_RAW16 = 2,
00185     /** sync, headers, edc/ecc and packed p-w subs provided by lib/user */
00186     BURN_BLOCK_RAW96P = 4,
00187     /** sync, headers, edc/ecc and raw p-w subs provided by lib/user */
00188     BURN_BLOCK_RAW96R = 8,
00189     /** only 2048 bytes of user data provided by lib/user */
00190     BURN_BLOCK_MODE1 = 256,
00191     /** 2336 bytes of user data provided by lib/user */
00192     BURN_BLOCK_MODE2R = 512,
00193     /** 2048 bytes of user data provided by lib/user
00194         subheader provided in write parameters
00195         are we ever going to support this shit?  I vote no.
00196         (supposed to be supported on all drives...)
00197     */
00198     BURN_BLOCK_MODE2_PATHETIC = 1024,
00199     /** 2048 bytes of data + 8 byte subheader provided by lib/user
00200         hey, this is also dumb
00201     */
00202     BURN_BLOCK_MODE2_LAME = 2048,
00203     /** 2324 bytes of data provided by lib/user
00204         subheader provided in write parameters
00205         no sir, I don't like it.
00206     */
00207     BURN_BLOCK_MODE2_OBSCURE = 4096,
00208     /** 2332 bytes of data supplied by lib/user
00209         8 bytes sub header provided in write parameters
00210         this is the second least suck mode2, and is mandatory for
00211         all drives to support.
00212     */
00213     BURN_BLOCK_MODE2_OK = 8192,
00214     /** SAO block sizes are based on cue sheet, so use this. */
00215     BURN_BLOCK_SAO = 16384
00216 };
00217 
00218 /** Possible status of the drive in regard to the disc in it. */
00219 enum burn_disc_status
00220 {
00221     /** The current status is not yet known */
00222     BURN_DISC_UNREADY,
00223 
00224     /** The drive holds a blank disc. It is ready for writing from scratch.
00225         Unused multi-session media:
00226           CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, BD-R
00227         Blanked multi-session media (i.e. treated by burn_disc_erase())
00228           CD-RW, DVD-RW
00229         Overwriteable media with or without valid data
00230           DVD-RAM, DVD+RW, formatted DVD-RW, BD-RE
00231     */
00232     BURN_DISC_BLANK,
00233 
00234     /** There is no disc at all in the drive */
00235     BURN_DISC_EMPTY,
00236 
00237     /** There is an incomplete disc in the drive. It is ready for appending
00238         another session.
00239         Written but not yet closed multi-session media
00240           CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, BD-R
00241     */
00242     BURN_DISC_APPENDABLE,
00243 
00244     /** There is a disc with data on it in the drive. It is usable only for
00245         reading.
00246         Written and closed multi-session media
00247           CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, BD-R
00248         Read-Only media
00249           CD-ROM, DVD-ROM, BD-ROM
00250         Note that many DVD-ROM drives report any written media
00251         as Read-Only media and not by their real media types.
00252     */
00253     BURN_DISC_FULL,
00254 
00255     /* ts A61007 */
00256         /* @since 0.2.4 */
00257     /** The drive was not grabbed when the status was inquired */
00258     BURN_DISC_UNGRABBED,
00259 
00260     /* ts A61020 */
00261         /* @since 0.2.6 */
00262     /** The media seems to be unsuitable for reading and for writing */
00263     BURN_DISC_UNSUITABLE
00264 };
00265 
00266 
00267 /** Possible data source return values */
00268 enum burn_source_status
00269 {
00270     /** The source is ok */
00271     BURN_SOURCE_OK,
00272     /** The source is at end of file */
00273     BURN_SOURCE_EOF,
00274     /** The source is unusable */
00275     BURN_SOURCE_FAILED
00276 };
00277 
00278 
00279 /** Possible busy states for a drive */
00280 enum burn_drive_status
00281 {
00282     /** The drive is not in an operation */
00283     BURN_DRIVE_IDLE,
00284     /** The library is spawning the processes to handle a pending
00285         operation (A read/write/etc is about to start but hasn't quite
00286         yet) */
00287     BURN_DRIVE_SPAWNING,
00288     /** The drive is reading data from a disc */
00289     BURN_DRIVE_READING,
00290     /** The drive is writing data to a disc */
00291     BURN_DRIVE_WRITING,
00292     /** The drive is writing Lead-In */
00293     BURN_DRIVE_WRITING_LEADIN,
00294     /** The drive is writing Lead-Out */
00295     BURN_DRIVE_WRITING_LEADOUT,
00296     /** The drive is erasing a disc */
00297     BURN_DRIVE_ERASING,
00298     /** The drive is being grabbed */
00299     BURN_DRIVE_GRABBING,
00300 
00301     /* ts A61102 */
00302         /* @since 0.2.6 */
00303     /** The drive gets written zeroes before the track payload data */
00304     BURN_DRIVE_WRITING_PREGAP,
00305     /** The drive is told to close a track (TAO only) */
00306     BURN_DRIVE_CLOSING_TRACK,
00307     /** The drive is told to close a session (TAO only) */
00308     BURN_DRIVE_CLOSING_SESSION,
00309 
00310     /* ts A61223 */
00311         /* @since 0.3.0 */
00312     /** The drive is formatting media */
00313     BURN_DRIVE_FORMATTING,
00314 
00315     /* ts A70822 */
00316         /* @since 0.4.0 */
00317     /** The drive is busy in synchronous read (if you see this then it
00318         has been interrupted) */
00319     BURN_DRIVE_READING_SYNC,
00320     /** The drive is busy in synchronous write (if you see this then it
00321         has been interrupted) */
00322     BURN_DRIVE_WRITING_SYNC
00323     
00324 };
00325 
00326     
00327 /** Information about a track on a disc - this is from the q sub channel of the
00328     lead-in area of a disc.  The documentation here is very terse.
00329     See a document such as mmc3 for proper information.
00330 
00331     CAUTION : This structure is prone to future extension !
00332 
00333     Do not restrict your application to unsigned char with any counter like
00334     "session", "point", "pmin", ...
00335     Do not rely on the current size of a burn_toc_entry. 
00336 
00337     ts A70201 : DVD extension, see below
00338 */
00339 struct burn_toc_entry
00340 {
00341     /** Session the track is in */
00342     unsigned char session;
00343     /** Type of data.  for this struct to be valid, it must be 1 */
00344     unsigned char adr;
00345     /** Type of data in the track */
00346     unsigned char control;
00347     /** Zero.  Always.  Really. */
00348     unsigned char tno;
00349     /** Track number or special information */
00350     unsigned char point;
00351     unsigned char min;
00352     unsigned char sec;
00353     unsigned char frame;
00354     unsigned char zero;
00355     /** Track start time minutes for normal tracks */
00356     unsigned char pmin;
00357     /** Track start time seconds for normal tracks */
00358     unsigned char psec;
00359     /** Track start time frames for normal tracks */
00360     unsigned char pframe;
00361 
00362     /* Indicates whether extension data are valid and eventually override
00363        older elements in this structure:
00364          bit0= DVD extension is valid @since 0.3.2
00365                    @since 0.5.2 : DVD extensions are made valid for CD too
00366     */
00367     unsigned char extensions_valid;  
00368 
00369     /* ts A70201 : DVD extension. extensions_valid:bit0
00370        If invalid the members are guaranteed to be 0. */
00371         /* @since 0.3.2 */
00372     /* Tracks and session numbers are 16 bit. Here are the high bytes. */
00373     unsigned char session_msb;
00374     unsigned char point_msb;
00375     /* pmin, psec, and pframe may be too small if DVD extension is valid */
00376     int start_lba; 
00377     /* min, sec, and frame may be too small if DVD extension is valid */
00378     int track_blocks;
00379     
00380     /* ts A90909 : LRA extension. extensions_valid:bit1 */
00381     /* @since 0.7.2 */
00382     /* MMC-5 6.27.3.18 : The Last Recorded Address is valid for DVD-R,
00383                       DVD-R DL when LJRS = 00b, DVD-RW, HD DVD-R, and BD-R.
00384        This would mean profiles: 0x11, 0x15, 0x13, 0x14, 0x51, 0x41, 0x42 
00385     */
00386     int last_recorded_address;
00387 };
00388 
00389 
00390 /** Data source interface for tracks.
00391     This allows to use arbitrary program code as provider of track input data.
00392 
00393     Objects compliant to this interface are either provided by the application
00394     or by API calls of libburn: burn_fd_source_new() , burn_file_source_new(),
00395     and burn_fifo_source_new().
00396 
00397     The API calls allow to use any file object as data source. Consider to feed
00398     an eventual custom data stream asynchronously into a pipe(2) and to let
00399     libburn handle the rest. 
00400     In this case the following rule applies:
00401     Call burn_source_free() exactly once for every source obtained from
00402     libburn API. You MUST NOT otherwise use or manipulate its components.
00403 
00404     In general, burn_source objects can be freed as soon as they are attached
00405     to track objects. The track objects will keep them alive and dispose them
00406     when they are no longer needed. With a fifo burn_source it makes sense to
00407     keep the own reference for inquiring its state while burning is in
00408     progress.
00409 
00410     ---
00411 
00412     The following description of burn_source applies only to application
00413     implemented burn_source objects. You need not to know it for API provided
00414     ones.
00415 
00416     If you really implement an own passive data producer by this interface,
00417     then beware: it can do anything and it can spoil everything.
00418 
00419     In this case the functions (*read), (*get_size), (*set_size), (*free_data)
00420     MUST be implemented by the application and attached to the object at
00421     creation time.
00422     Function (*read_sub) is allowed to be NULL or it MUST be implemented and
00423     attached.
00424 
00425     burn_source.refcount MUST be handled properly: If not exactly as many
00426     references are freed as have been obtained, then either memory leaks or
00427     corrupted memory are the consequence.
00428     All objects which are referred to by *data must be kept existent until
00429     (*free_data) is called via burn_source_free() by the last referer.
00430 */
00431 struct burn_source {
00432 
00433     /** Reference count for the data source. MUST be 1 when a new source
00434             is created and thus the first reference is handed out. Increment
00435             it to take more references for yourself. Use burn_source_free()
00436             to destroy your references to it. */
00437     int refcount;
00438 
00439 
00440     /** Read data from the source. Semantics like with read(2), but MUST
00441         either deliver the full buffer as defined by size or MUST deliver
00442         EOF (return 0) or failure (return -1) at this call or at the
00443         next following call. I.e. the only incomplete buffer may be the
00444         last one from that source.
00445         libburn will read a single sector by each call to (*read).
00446         The size of a sector depends on BURN_MODE_*. The known range is
00447         2048 to 2352.
00448 
00449             If this call is reading from a pipe then it will learn
00450             about the end of data only when that pipe gets closed on the
00451             feeder side. So if the track size is not fixed or if the pipe
00452             delivers less than the predicted amount or if the size is not
00453             block aligned, then burning will halt until the input process
00454             closes the pipe.
00455 
00456         IMPORTANT:
00457         If this function pointer is NULL, then the struct burn_source is of
00458         version >= 1 and the job of .(*read)() is done by .(*read_xt)().
00459         See below, member .version.
00460     */
00461     int (*read)(struct burn_source *, unsigned char *buffer, int size);
00462 
00463 
00464     /** Read subchannel data from the source (NULL if lib generated) 
00465         WARNING: This is an obscure feature with CD raw write modes.
00466         Unless you checked the libburn code for correctness in that aspect
00467         you should not rely on raw writing with own subchannels.
00468         ADVICE: Set this pointer to NULL.
00469     */
00470     int (*read_sub)(struct burn_source *, unsigned char *buffer, int size);
00471 
00472 
00473     /** Get the size of the source's data. Return 0 means unpredictable
00474         size. If application provided (*get_size) allows return 0, then
00475         the application MUST provide a fully functional (*set_size).
00476     */
00477     off_t (*get_size)(struct burn_source *); 
00478 
00479 
00480     /* ts A70125 : BROKE BINARY BACKWARD COMPATIBILITY AT libburn-0.3.1. */
00481         /* @since 0.3.2 */
00482     /** Program the reply of (*get_size) to a fixed value. It is advised
00483         to implement this by a attribute  off_t fixed_size;  in *data .
00484         The read() function does not have to take into respect this fake
00485         setting. It is rather a note of libburn to itself. Eventually
00486         necessary truncation or padding is done in libburn. Truncation
00487         is usually considered a misburn. Padding is considered ok.
00488 
00489         libburn is supposed to work even if (*get_size) ignores the
00490             setting by (*set_size). But your application will not be able to
00491         enforce fixed track sizes by  burn_track_set_size() and possibly
00492         even padding might be left out.
00493     */
00494     int (*set_size)(struct burn_source *source, off_t size);
00495 
00496 
00497     /** Clean up the source specific data. This function will be called
00498         once by burn_source_free() when the last referer disposes the
00499         source.
00500     */
00501     void (*free_data)(struct burn_source *);
00502 
00503 
00504     /** Next source, for when a source runs dry and padding is disabled
00505         WARNING: This is an obscure feature. Set to NULL at creation and
00506                  from then on leave untouched and uninterpreted.
00507     */
00508     struct burn_source *next;
00509 
00510 
00511     /** Source specific data. Here the various source classes express their
00512         specific properties and the instance objects store their individual
00513         management data.
00514             E.g. data could point to a struct like this:
00515         struct app_burn_source
00516         {
00517             struct my_app *app_handle;
00518             ... other individual source parameters ...
00519             off_t fixed_size;
00520         };
00521 
00522         Function (*free_data) has to be prepared to clean up and free
00523         the struct.
00524     */
00525     void *data;
00526 
00527 
00528     /* ts A71222 : Supposed to be binary backwards compatible extension. */
00529         /* @since 0.4.2 */
00530     /** Valid only if above member .(*read)() is NULL. This indicates a
00531         version of struct burn_source younger than 0.
00532         From then on, member .version tells which further members exist
00533         in the memory layout of struct burn_source. libburn will only touch
00534         those announced extensions.
00535 
00536         Versions:
00537          0  has .(*read)() != NULL, not even .version is present.
00538              1  has .version, .(*read_xt)(), .(*cancel)()
00539     */
00540     int version;
00541 
00542     /** This substitutes for (*read)() in versions above 0. */
00543     int (*read_xt)(struct burn_source *, unsigned char *buffer, int size);
00544 
00545     /** Informs the burn_source that the consumer of data prematurely
00546         ended reading. This call may or may not be issued by libburn
00547         before (*free_data)() is called.
00548     */
00549     int (*cancel)(struct burn_source *source);
00550 };
00551 
00552 
00553 /** Information on a drive in the system */
00554 struct burn_drive_info
00555 {
00556     /** Name of the vendor of the drive */
00557     char vendor[9];
00558     /** Name of the drive */
00559     char product[17];
00560     /** Revision of the drive */
00561     char revision[5];
00562 
00563     /** Invalid: Was: "Location of the drive in the filesystem." */
00564     /** This string has no meaning any more. Once it stored the persistent
00565         drive address. Now always use function  burn_drive_d_get_adr()  to
00566         inquire a persistent address.           ^^^^^^ ALWAYS ^^^^^^^^ */
00567     char location[17];
00568 
00569     /** Can the drive read DVD-RAM discs */
00570     unsigned int read_dvdram:1;
00571     /** Can the drive read DVD-R discs */
00572     unsigned int read_dvdr:1;
00573     /** Can the drive read DVD-ROM discs */
00574     unsigned int read_dvdrom:1;
00575     /** Can the drive read CD-R discs */
00576     unsigned int read_cdr:1;
00577     /** Can the drive read CD-RW discs */
00578     unsigned int read_cdrw:1;
00579 
00580     /** Can the drive write DVD-RAM discs */
00581     unsigned int write_dvdram:1;
00582     /** Can the drive write DVD-R discs */
00583     unsigned int write_dvdr:1;
00584     /** Can the drive write CD-R discs */
00585     unsigned int write_cdr:1;
00586     /** Can the drive write CD-RW discs */
00587     unsigned int write_cdrw:1;
00588 
00589     /** Can the drive simulate a write */
00590     unsigned int write_simulate:1;
00591 
00592     /** Can the drive report C2 errors */
00593     unsigned int c2_errors:1;
00594 
00595     /** The size of the drive's buffer (in kilobytes) */
00596     int buffer_size;
00597     /** 
00598      * The supported block types in tao mode.
00599      * They should be tested with the desired block type.
00600      * See also burn_block_types.
00601      */
00602     int tao_block_types;
00603     /** 
00604      * The supported block types in sao mode.
00605      * They should be tested with the desired block type.
00606      * See also burn_block_types.
00607      */
00608     int sao_block_types;
00609     /** 
00610      * The supported block types in raw mode.
00611      * They should be tested with the desired block type.
00612      * See also burn_block_types.
00613      */
00614     int raw_block_types;
00615     /** 
00616      * The supported block types in packet mode.
00617      * They should be tested with the desired block type.
00618      * See also burn_block_types.
00619      */
00620     int packet_block_types;
00621 
00622     /** The value by which this drive can be indexed when using functions
00623         in the library. This is the value to pass to all libbburn functions
00624         that operate on a drive. */
00625     struct burn_drive *drive;
00626 };
00627 
00628 
00629 /** Operation progress report. All values are 0 based indices. 
00630  * */
00631 struct burn_progress {
00632     /** The total number of sessions */
00633     int sessions;
00634     /** Current session.*/
00635     int session;
00636     /** The total number of tracks */
00637     int tracks;
00638     /** Current track. */
00639     int track;
00640     /** The total number of indices */
00641     int indices;
00642     /** Curent index. */
00643     int index;
00644     /** The starting logical block address */
00645     int start_sector;
00646     /** On write: The number of sectors.
00647         On blank: 0x10000 as upper limit for relative progress steps */
00648     int sectors;
00649     /** On write: The current sector being processed.
00650         On blank: Relative progress steps 0 to 0x10000 */
00651     int sector;
00652 
00653     /* ts A61023 */
00654         /* @since 0.2.6 */
00655     /** The capacity of the drive buffer */
00656     unsigned buffer_capacity;
00657     /** The free space in the drive buffer (might be slightly outdated) */
00658     unsigned buffer_available;
00659 
00660     /* ts A61119 */
00661         /* @since 0.2.6 */
00662     /** The number of bytes sent to the drive buffer */
00663     off_t buffered_bytes;
00664     /** The minimum number of bytes stored in buffer during write.
00665             (Caution: Before surely one buffer size of bytes was processed,
00666                       this value is 0xffffffff.) 
00667     */
00668     unsigned buffer_min_fill;
00669 };
00670 
00671 
00672 /* ts A61226 */
00673 /* @since 0.3.0 */
00674 /** Description of a speed capability as reported by the drive in conjunction
00675     with eventually loaded media. There can be more than one such object per
00676     drive. So they are chained via .next and .prev , where NULL marks the end
00677     of the chain. This list is set up by burn_drive_scan() and gets updated
00678     by burn_drive_grab().
00679     A copy may be obtained by burn_drive_get_speedlist() and disposed by
00680     burn_drive_free_speedlist().
00681     For technical background info see SCSI specs MMC and SPC:
00682     mode page 2Ah (from SPC 5Ah MODE SENSE) , mmc3r10g.pdf , 6.3.11 Table 364
00683     ACh GET PERFORMANCE, Type 03h , mmc5r03c.pdf , 6.8.5.3 Table 312
00684 */
00685 struct burn_speed_descriptor {
00686 
00687     /** Where this info comes from : 
00688         0 = misc , 1 = mode page 2Ah , 2 = ACh GET PERFORMANCE */
00689     int source;
00690 
00691     /** The media type that was current at the time of report
00692         -2 = state unknown, -1 = no media was loaded , else see
00693         burn_disc_get_profile() */
00694     int profile_loaded;
00695     char profile_name[80];
00696 
00697     /** The attributed capacity of appropriate media in logical block units
00698         i.e. 2352 raw bytes or 2048 data bytes. -1 = capacity unknown. */
00699     int end_lba;
00700 
00701     /** Speed is given in 1000 bytes/s , 0 = invalid. The numbers
00702         are supposed to be usable with burn_drive_set_speed() */
00703     int write_speed;
00704     int read_speed;
00705 
00706     /** Expert info from ACh GET PERFORMANCE and/or mode page 2Ah.
00707         Expect values other than 0 or 1 to get a meaning in future.*/
00708     /* Rotational control: 0 = CLV/default , 1 = CAV */
00709     int wrc;
00710     /* 1 = drive promises reported performance over full media */
00711     int exact;
00712     /* 1 = suitable for mixture of read and write */
00713     int mrw;
00714 
00715     /** List chaining. Use .next until NULL to iterate over the list */
00716     struct burn_speed_descriptor *prev;
00717     struct burn_speed_descriptor *next;
00718 };
00719 
00720 
00721 /** Initialize the library.
00722     This must be called before using any other functions in the library. It
00723     may be called more than once with no effect.
00724     It is possible to 'restart' the library by shutting it down and
00725     re-initializing it. Once this was necessary if you follow the older and
00726     more general way of accessing a drive via burn_drive_scan() and
00727     burn_drive_grab(). See burn_drive_scan_and_grab() with its strong
00728     urges and its explanations.
00729     @return Nonzero if the library was able to initialize; zero if
00730             initialization failed.
00731 */
00732 int burn_initialize(void);
00733 
00734 /** Shutdown the library.
00735     This should be called before exiting your application. Make sure that all
00736     drives you have grabbed are released <i>before</i> calling this.
00737 */
00738 void burn_finish(void);
00739 
00740 
00741 /* ts A61002 */
00742 /** Abort any running drive operation and eventually call burn_finish().
00743 
00744     You MUST shut down the busy drives if an aborting event occurs during a
00745     burn run. For that you may call this function either from your own signal
00746     handling code or indirectly by activating the built-in signal handling:
00747       burn_set_signal_handling("my_app_name : ", NULL, 0);
00748     Else you may eventually call burn_drive_cancel() on the active drives and
00749     wait for them to assume state BURN_DRIVE_IDLE.
00750     @param patience      Maximum number of seconds to wait for drives to
00751                          finish.
00752                          @since 0.7.8 :
00753                          If this is -1, then only the cancel operations will
00754                          be performed and no burn_finish() will happen.
00755     @param pacifier_func If not NULL: a function to produce appeasing messages.
00756                          See burn_abort_pacifier() for an example.
00757     @param handle        Opaque handle to be used with pacifier_func
00758     @return 1  ok, all went well
00759             0  had to leave a drive in unclean state
00760             <0 severe error, do no use libburn again
00761     @since 0.2.6
00762 */
00763 int burn_abort(int patience, 
00764                int (*pacifier_func)(void *handle, int patience, int elapsed),
00765                void *handle);
00766 
00767 /** A pacifier function suitable for burn_abort.
00768     @param handle If not NULL, a pointer to a text suitable for printf("%s")
00769     @param patience Maximum number of seconds to wait
00770     @param elapsed  Elapsed number of seconds
00771 */
00772 int burn_abort_pacifier(void *handle, int patience, int elapsed);
00773 
00774 
00775 /** ts A61006 : This is for development only. Not suitable for applications.
00776     Set the verbosity level of the library. The default value is 0, which means
00777     that nothing is output on stderr. The more you increase this, the more
00778     debug output should be displayed on stderr for you.
00779     @param level The verbosity level desired. 0 for nothing, higher positive
00780                  values for more information output.
00781 */
00782 void burn_set_verbosity(int level);
00783 
00784 /* ts A91111 */
00785 /** Enable resp. disable logging of SCSI commands (currently GNU/Linux only).
00786     This call can be made at any time - even before burn_initialize().
00787     It is in effect for all active drives and currently not very thread
00788     safe for multiple drives.
00789     @param flag  Bitfield for control purposes. The default is 0.
00790                  bit0= log to file /tmp/libburn_sg_command_log
00791                  bit1= log to stderr
00792                  bit2= flush output after each line
00793     @since 0.7.4
00794 */
00795 void burn_set_scsi_logging(int flag);
00796 
00797 /* ts A60813 */
00798 /** Set parameters for behavior on opening device files. To be called early
00799     after burn_initialize() and before any bus scan. But not mandatory at all.
00800     Parameter value 1 enables a feature, 0 disables.  
00801     Default is (1,0,0). Have a good reason before you change it.
00802     @param exclusive
00803                      0 = no attempt to make drive access exclusive.
00804                      1 = Try to open only devices which are not marked as busy
00805                      and try to mark them busy if opened sucessfully. (O_EXCL
00806                      on GNU/Linux , flock(LOCK_EX) on FreeBSD.)
00807                      2 = in case of a SCSI device, also try to open exclusively
00808                          the matching /dev/sr, /dev/scd and /dev/st .
00809                      One may select a device SCSI file family by adding
00810                       0 = default family
00811                       4 = /dev/sr%d
00812                       8 = /dev/scd%d
00813                      16 = /dev/sg%d
00814                      Do not use other values !
00815                      Add 32 to demand on GNU/Linux an exclusive lock by
00816                      fcntl(,F_SETLK,) after open() has succeeded.
00817     @param blocking  Try to wait for drives which do not open immediately but
00818                      also do not return an error as well. (O_NONBLOCK)
00819                      This might stall indefinitely with /dev/hdX hard disks.
00820     @param abort_on_busy  Unconditionally abort process when a non blocking
00821                           exclusive opening attempt indicates a busy drive.
00822                           Use this only after thorough tests with your app.
00823     @since 0.2.2
00824 */
00825 void burn_preset_device_open(int exclusive, int blocking, int abort_on_busy);
00826 
00827 
00828 /* ts A70223 */
00829 /** Allows the use of media types which are implemented in libburn but not yet
00830     tested. The list of those untested profiles is subject to change.
00831              - Currently no media types are under test reservation -
00832     If you really test such media, then please report the outcome on
00833     libburn-hackers@pykix.org
00834     If ever then this call should be done soon after burn_initialize() before
00835     any drive scanning.
00836     @param yes 1=allow all implemented profiles, 0=only tested media (default)
00837     @since 0.3.4
00838 */
00839 void burn_allow_untested_profiles(int yes);
00840 
00841 
00842 /* ts A60823 */
00843 /** Aquire a drive with known persistent address.
00844 
00845     This is the sysadmin friendly way to open one drive and to leave all
00846     others untouched. It bundles the following API calls to form a
00847     non-obtrusive way to use libburn:
00848       burn_drive_add_whitelist() , burn_drive_scan() , burn_drive_grab()
00849     You are *strongly urged* to use this call whenever you know the drive
00850     address in advance.
00851 
00852     If not, then you have to use directly above calls. In that case, you are
00853     *strongly urged* to drop any unintended drive which will be exclusively
00854     occupied and not closed by burn_drive_scan().
00855     This can be done by shutting down the library including a call to
00856     burn_finish(). You may later start a new libburn session and should then
00857     use the function described here with an address obtained after
00858     burn_drive_scan() via burn_drive_d_get_adr(drive_infos[driveno].drive,adr).
00859     Another way is to drop the unwanted drives by burn_drive_info_forget().
00860 
00861     Operating on multiple drives:
00862 
00863     Different than with burn_drive_scan() it is allowed to call
00864     burn_drive_scan_and_grab() without giving up any other scanned drives. So
00865     this call can be used to get a collection of more than one aquired drives.
00866     The attempt to aquire the same drive twice will fail, though.
00867 
00868     Pseudo-drives:
00869 
00870     burn_drive_scan_and_grab() is able to aquire virtual drives which will
00871     accept options much like a MMC burner drive. Many of those options will not
00872     cause any effect, though. The address of a pseudo-drive begins with
00873     prefix "stdio:" followed by a path.
00874     Examples:  "stdio:/tmp/pseudo_drive" , "stdio:/dev/null" , "stdio:-"
00875 
00876     If the path is empty, the result is a null-drive = drive role 0.
00877     It pretends to have loaded no media and supports no reading or writing.
00878 
00879     If the path leads to an existing regular file, or to a not yet existing
00880     file, or to an existing block device, then the result is a random access
00881     stdio-drive capable of reading and writing = drive role 2.
00882 
00883     If the path leads to an existing file of any type other than directory,
00884     then the result is a sequential write-only stdio-drive = drive role 3.
00885 
00886     The special address form "stdio:/dev/fd/{number}" is interpreted literally
00887     as reference to open file descriptor {number}. This address form coincides
00888     with real files on some systems, but it is in fact hardcoded in libburn.
00889     Special address "stdio:-" means stdout = "stdio:/dev/fd/1".
00890     The role of such a drive is determined by the file type obtained via
00891     fstat({number}).
00892    
00893     Roles 2 and 3 perform all their eventual data transfer activities on a file
00894     via standard i/o functions open(2), lseek(2), read(2), write(2), close(2).
00895     The media profile is reported as 0xffff. Write space information from those
00896     media is not necessarily realistic.
00897 
00898     The capabilities of role 2 resemble DVD-RAM but it can simulate writing.
00899     If the path does not exist in the filesystem yet, it is attempted to create
00900     it as a regular file as soon as write operations are started.
00901 
00902     The capabilities of role 3 resemble a blank DVD-R. Nevertheless each
00903     burn_disc_write() run may only write a single track.
00904 
00905     One may distinguish pseudo-drives from MMC drives by call
00906     burn_drive_get_drive_role().
00907 
00908     @param drive_infos On success returns a one element array with the drive
00909                   (cdrom/burner). Thus use with driveno 0 only. On failure
00910                   the array has no valid elements at all.
00911                   The returned array should be freed via burn_drive_info_free()
00912                   when it is no longer needed.
00913                   This is a result from call burn_drive_scan(). See there.
00914                   Use with driveno 0 only.
00915     @param adr    The persistent address of the desired drive. Either once
00916                   obtained by burn_drive_d_get_adr() or composed skillfully by
00917                   application resp. its user. E.g. "/dev/sr0".
00918                   Consider to preprocess it by burn_drive_convert_fs_adr().
00919     @param load   Nonzero to make the drive attempt to load a disc (close its
00920                   tray door, etc).
00921     @return       1 = success , 0 = drive not found , -1 = other error
00922     @since 0.2.2
00923 */    
00924 int burn_drive_scan_and_grab(struct burn_drive_info *drive_infos[],
00925                              char* adr, int load);
00926 
00927 
00928 /* ts A51221 */
00929 /* @since 0.2.2 */
00930 /** Maximum number of particularly permissible drive addresses */
00931 #define BURN_DRIVE_WHITELIST_LEN 255
00932 
00933 /** Add a device to the list of permissible drives. As soon as some entry is in
00934     the whitelist all non-listed drives are banned from scanning.
00935     @return 1 success, <=0 failure
00936     @since 0.2.2
00937 */
00938 int burn_drive_add_whitelist(char *device_address);
00939 
00940 /** Remove all drives from whitelist. This enables all possible drives. */
00941 void burn_drive_clear_whitelist(void);
00942 
00943 
00944 /** Scan for drives. This function MUST be called until it returns nonzero.
00945     In case of re-scanning:
00946     All pointers to struct burn_drive and all struct burn_drive_info arrays
00947     are invalidated by using this function. Do NOT store drive pointers across
00948     calls to this function !
00949     To avoid invalid pointers one MUST free all burn_drive_info arrays
00950     by burn_drive_info_free() before calling burn_drive_scan() a second time.
00951     If there are drives left, then burn_drive_scan() will refuse to work.
00952 
00953     After this call all drives depicted by the returned array are subject
00954     to eventual (O_EXCL) locking. See burn_preset_device_open(). This state
00955     ends either with burn_drive_info_forget() or with burn_drive_release().
00956     It is unfriendly to other processes on the system to hold drives locked
00957     which one does not definitely plan to use soon.
00958     @param drive_infos Returns an array of drive info items (cdroms/burners).
00959                   The returned array must be freed by burn_drive_info_free()
00960                   before burn_finish(), and also before calling this function
00961                   burn_drive_scan() again.
00962     @param n_drives Returns the number of drive items in drive_infos.
00963     @return 0 while scanning is not complete
00964             >0 when it is finished sucessfully,
00965             <0 when finished but failed.
00966 */
00967 int burn_drive_scan(struct burn_drive_info *drive_infos[],
00968             unsigned int *n_drives);
00969 
00970 /* ts A60904 : ticket 62, contribution by elmom */
00971 /** Release memory about a single drive and any exclusive lock on it.
00972     Become unable to inquire or grab it. Expect FATAL consequences if you try.
00973     @param drive_info pointer to a single element out of the array
00974                       obtained from burn_drive_scan() : &(drive_infos[driveno])
00975     @param force controls degree of permissible drive usage at the moment this
00976                  function is called, and the amount of automatically provided
00977                  drive shutdown : 
00978                   0= drive must be ungrabbed and BURN_DRIVE_IDLE
00979                   1= try to release drive resp. accept BURN_DRIVE_GRABBING 
00980                  Use these two only. Further values are to be defined.
00981     @return 1 on success, 2 if drive was already forgotten,
00982             0 if not permissible, <0 on other failures, 
00983     @since 0.2.2
00984 */
00985 int burn_drive_info_forget(struct burn_drive_info *drive_info, int force);
00986 
00987 
00988 /** When no longer needed, free a whole burn_drive_info array which was
00989     returned by burn_drive_scan().
00990     For freeing single drive array elements use burn_drive_info_forget().
00991 */
00992 void burn_drive_info_free(struct burn_drive_info drive_infos[]);
00993 
00994 
00995 /* ts A60823 */
00996 /* @since 0.2.2 */
00997 /** Maximum length+1 to expect with a persistent drive address string */
00998 #define BURN_DRIVE_ADR_LEN 1024
00999 
01000 /* ts A70906 */
01001 /** Inquire the persistent address of the given drive.
01002     @param drive The drive to inquire.
01003     @param adr   An application provided array of at least BURN_DRIVE_ADR_LEN
01004                  characters size. The persistent address gets copied to it.
01005     @return >0 success , <=0 error (due to libburn internal problem)
01006     @since 0.4.0
01007 */
01008 int burn_drive_d_get_adr(struct burn_drive *drive, char adr[]);
01009 
01010 /* A60823 */
01011 /** Inquire the persistent address of a drive via a given drive_info object.
01012     (Note: This is a legacy call.)
01013     @param drive_info The drive to inquire.Usually some &(drive_infos[driveno])
01014     @param adr   An application provided array of at least BURN_DRIVE_ADR_LEN
01015                  characters size. The persistent address gets copied to it.
01016     @return >0 success , <=0 error (due to libburn internal problem)
01017     @since 0.2.6
01018 */
01019 int burn_drive_get_adr(struct burn_drive_info *drive_info, char adr[]);
01020 
01021 
01022 /* ts A60922 ticket 33 */
01023 /** Evaluate whether the given address would be a possible persistent drive
01024     address of libburn.
01025     @return 1 means yes, 0 means no
01026     @since 0.2.6
01027 */
01028 int burn_drive_is_enumerable_adr(char *adr);
01029 
01030 /* ts A60922 ticket 33 */
01031 /** Try to convert a given existing filesystem address into a persistent drive
01032     address. This succeeds with symbolic links or if a hint about the drive's
01033     system address can be read from the filesystem object and a matching drive
01034     is found.
01035     @param path The address of an existing file system object
01036     @param adr  An application provided array of at least BURN_DRIVE_ADR_LEN
01037                 characters size. The persistent address gets copied to it.
01038     @return     1 = success , 0 = failure , -1 = severe error
01039     @since 0.2.6
01040 */
01041 int burn_drive_convert_fs_adr(char *path, char adr[]);
01042 
01043 /* ts A60923 */
01044 /** Try to convert a given SCSI address of bus,host,channel,target,lun into
01045     a persistent drive address. If a SCSI address component parameter is < 0
01046     then it is not decisive and the first enumerated address which matches
01047     the >= 0 parameters is taken as result.
01048     Note: bus and (host,channel) are supposed to be redundant.
01049     @param bus_no "Bus Number" (something like a virtual controller)
01050     @param host_no "Host Number" (something like half a virtual controller)
01051     @param channel_no "Channel Number" (other half of "Host Number")
01052     @param target_no "Target Number" or "SCSI Id" (a device)
01053     @param lun_no "Logical Unit Number" (a sub device)
01054     @param adr  An application provided array of at least BURN_DRIVE_ADR_LEN
01055                 characters size. The persistent address gets copied to it.
01056     @return     1 = success , 0 = failure , -1 = severe error
01057     @since 0.2.6
01058 */
01059 int burn_drive_convert_scsi_adr(int bus_no, int host_no, int channel_no,
01060                  int target_no, int lun_no, char adr[]);
01061 
01062 /* ts B10728 */
01063 /** Try to convert a given persistent drive address into the address of a
01064     symbolic link that points to this drive address.
01065     Modern GNU/Linux systems may shuffle drive addresses from boot to boot.
01066     The udev daemon is supposed to create links which always point to the
01067     same drive, regardless of its system address.
01068     This call tries to find such links.
01069     @param dev_adr     Should contain a drive address as returned by
01070                        burn_drive_scan().
01071     @param link_adr    An application provided array of at least
01072                        BURN_DRIVE_ADR_LEN characters size. The found link
01073                        address gets copied to it.
01074     @param dir_adr     The address of the directory where to look for links.
01075                        Normally: "/dev"
01076     @param templ       An array of pointers to name templates, which
01077                        links have to match. A symbolic link in dir_adr matches
01078                        a name template if it begins by that text. E.g.
01079                        link address "/dev/dvdrw1" matches template "dvdrw".
01080                        If templ is NULL, then the default array gets used:
01081                         {"dvdrw", "cdrw", "dvd", "cdrom", "cd"}
01082                        If several links would match, then a link will win,
01083                        which matches the template with the lowest array index.
01084                        Among these candidates, the one with the lowest strcmp()
01085                        rank will be chosen as link_adr.
01086     @param num_templ   Number of array elements in templ.
01087     @param flag        Bitfield for control purposes. Unused yet. Submit 0.
01088     @return            <0 severe error, 0 failed to search, 2 nothing found
01089                        1 success, link_adr is valid
01090     @since 1.1.4
01091 */
01092 int burn_lookup_device_link(char *dev_adr, char link_adr[],
01093                          char *dir_adr, char **templ, int num_templ, int flag);
01094 
01095 /* ts A60923 - A61005 */
01096 /** Try to obtain bus,host,channel,target,lun from path. If there is an SCSI
01097     address at all, then this call should succeed with a persistent
01098     drive address obtained via burn_drive_d_get_adr(). It is also supposed to
01099     succeed with any device file of a (possibly emulated) SCSI device.
01100     @return     1 = success , 0 = failure , -1 = severe error
01101     @since 0.2.6
01102 */
01103 int burn_drive_obtain_scsi_adr(char *path, int *bus_no, int *host_no,
01104                 int *channel_no, int *target_no, int *lun_no);
01105 
01106 /** Grab a drive. This must be done before the drive can be used (for reading,
01107     writing, etc).
01108     @param drive The drive to grab. This is found in a returned
01109                  burn_drive_info struct.
01110     @param load Nonzero to make the drive attempt to load a disc (close its
01111                 tray door, etc).
01112     @return 1 if it was possible to grab the drive, else 0
01113 */
01114 int burn_drive_grab(struct burn_drive *drive, int load);
01115 
01116 /* ts B00114 */
01117 /* Probe available CD write modes and block types. In earlier versions this
01118    was done unconditionally on drive examination or aquiration. But it is
01119    lengthy and obtrusive, up to spoiling burn runs on the examined drives.
01120    So now this probing is omitted by default. All drives which announce to be
01121    capable of CD or DVD writing, get blindly attributed the capability for
01122    SAO and TAO. Applications which are interested in RAW modes or want to
01123    rely on the traditional write mode information, may use this call.
01124    @param drive_info  drive object to be inquired
01125    @return            >0 indicates success, <=0 means failure
01126    @since 0.7.6
01127 */
01128 int burn_drive_probe_cd_write_modes(struct burn_drive_info *drive_info);
01129 
01130 /* ts A90824 */
01131 /** Calm down or alert a drive. Some drives stay alert after reading for
01132     quite some time. This saves time with the startup for the next read
01133     operation but also causes noise and consumes extra energy. It makes
01134     sense to calm down the drive if no read operation is expected for the
01135     next few seconds. The drive will get alert automatically if operations
01136     are required.
01137     @param d      The drive to influence.
01138     @param flag   Bitfield for control purposes
01139                   bit0= become alert (else start snoozing)
01140                         This is not mandatory to allow further drive operations
01141     @return       1= success , 0= drive role not suitable for calming
01142     @since 0.7.0
01143 */
01144 int burn_drive_snooze(struct burn_drive *d, int flag);
01145 
01146 
01147 /** Release a drive. This should not be done until the drive is no longer
01148     busy (see burn_drive_get_status).
01149     @param drive The drive to release.
01150     @param eject Nonzero to make the drive eject the disc in it.
01151 */
01152 void burn_drive_release(struct burn_drive *drive, int eject);
01153 
01154 
01155 /* ts A70918 */
01156 /** Like burn_drive_release() but keeping the drive tray closed and its
01157     eject button disabled. This physically locked drive state will last until
01158     the drive is grabbed again and released via burn_drive_release().
01159     Programs like eject, cdrecord, growisofs will break that ban too.
01160     @param d    The drive to release and leave locked.
01161     @param flag Bitfield for control purposes (unused yet, submit 0)
01162     @return 1 means success, <=0 means failure
01163     @since 0.4.0
01164 */
01165 int burn_drive_leave_locked(struct burn_drive *d, int flag);
01166 
01167 
01168 /** Returns what kind of disc a drive is holding. This function may need to be
01169     called more than once to get a proper status from it. See burn_disc_status
01170     for details.
01171     @param drive The drive to query for a disc.
01172     @return The status of the drive, or what kind of disc is in it.
01173             Note: BURN_DISC_UNGRABBED indicates wrong API usage
01174 */
01175 enum burn_disc_status burn_disc_get_status(struct burn_drive *drive);
01176 
01177 
01178 /* ts A61020 */
01179 /** WARNING: This revives an old bug-like behavior that might be dangerous.
01180     Sets the drive status to BURN_DISC_BLANK if it is BURN_DISC_UNREADY
01181     or BURN_DISC_UNSUITABLE. Thus marking media as writable which actually
01182     failed to declare themselves either blank or (partially) filled.
01183     @return 1 drive status has been set , 0 = unsuitable drive status
01184     @since 0.2.6
01185 */
01186 int burn_disc_pretend_blank(struct burn_drive *drive);
01187 
01188 
01189 /* ts A61106 */
01190 /** WARNING: This overrides the safety measures against unsuitable media.
01191     Sets the drive status to BURN_DISC_FULL if it is BURN_DISC_UNREADY
01192     or BURN_DISC_UNSUITABLE. Thus marking media as blankable which actually
01193     failed to declare themselves either blank or (partially) filled.
01194     @since 0.2.6
01195 */
01196 int burn_disc_pretend_full(struct burn_drive *drive);
01197 
01198 
01199 /* ts A61021 */
01200 /** Reads ATIP information from inserted media. To be obtained via
01201     burn_drive_get_write_speed(), burn_drive_get_min_write_speed(),
01202     burn_drive_get_start_end_lba(). The drive must be grabbed for this call.
01203     @param drive The drive to query.
01204     @return 1=sucess, 0=no valid ATIP info read, -1 severe error
01205     @since 0.2.6
01206 */
01207 int burn_disc_read_atip(struct burn_drive *drive);
01208 
01209 
01210 /* ts A61020 */
01211 /** Returns start and end lba of the media which is currently inserted
01212     in the given drive. The drive has to be grabbed to have hope for reply.
01213     Shortcomming (not a feature): unless burn_disc_read_atip() was called 
01214     only blank media will return valid info.
01215     @param drive The drive to query.
01216     @param start_lba Returns the start lba value
01217     @param end_lba Returns the end lba value
01218     @param flag Bitfield for control purposes (unused yet, submit 0)
01219     @return 1 if lba values are valid , 0 if invalid
01220     @since 0.2.6
01221 */
01222 int burn_drive_get_start_end_lba(struct burn_drive *drive,
01223                                  int *start_lba, int *end_lba, int flag);
01224 
01225 
01226 /* ts A90902 */
01227 /** Guess the manufacturer name of CD media from the ATIP addresses of lead-in
01228     and lead-out. (Currently only lead-in is interpreted. Lead-out may in
01229     future be used to identify the media type in more detail.)
01230     The parameters of this call should be obtained by burn_disc_read_atip(d),
01231     burn_drive_get_start_end_lba(d, &start_lba, &end_lba, 0),
01232     burn_lba_to_msf(start_lba, &m_li, &s_li, &f_li) and
01233     burn_lba_to_msf(end_lba, &m_lo, &s_lo, &f_lo).
01234     @param m_li  "minute" part of ATIP lead-in resp. start_lba
01235     @param s_li  "second" of lead-in resp. start_lba
01236     @param f_li  "frame" of lead-in
01237     @param m_lo  "minute" part of ATIP lead-out
01238     @param s_lo  "second" of lead-out
01239     @param f_lo  "frame" of lead-out
01240     @param flag  Bitfield for control purposes,
01241                  bit0= append a text "(aka ...)" to reply if other brands or
01242                        vendor names are known.
01243     @return      Printable text or NULL on memory shortage.
01244                  Dispose by free() when no longer needed.
01245     @since 0.7.2
01246 */
01247 char *burn_guess_cd_manufacturer(int m_li, int s_li, int f_li,
01248                                  int m_lo, int s_lo, int f_lo, int flag);
01249 
01250 /* ts A90909 */
01251 /** Retrieve some media information which is mainly specific to CD. For other
01252     media only the bits in reply parameter valid are supposed to be meaningful.
01253     @param d         The drive to query.
01254     @param disc_type A string saying either "CD-DA or CD-ROM", or "CD-I",
01255                      or ""CD-ROM XA", or "undefined".
01256     @param disc_id   A 32 bit number read from the media. (Meaning unclear yet)
01257     @param bar_code  8 hex digits from a barcode on media read by the drive
01258                      (if the drive has a bar code reader built in).
01259     @param app_code  The Host Application Code which must be set in the Write
01260                      Parameters Page if the media is not unrestricted (URU==0).
01261     @param valid     Replies bits which indicate the validity of other reply
01262                      parameters or the state of certain CD info bits:
01263                      bit0= disc_type is valid
01264                      bit1= disc_id is valid
01265                      bit2= bar_code is valid
01266                      bit3= disc_app_code is valid
01267                      bit4= Disc is unrestricted (URU bit, 51h READ DISC INFO)
01268                            This seems to be broken with my drives. The bit is
01269                            0 and the validity bit for disc_app_code is 0 too.
01270                      bit5= Disc is nominally erasable (Erasable bit)
01271                            This will be set with overwriteable media which
01272                            libburn normally considers to be unerasable blank.
01273     @return          1 success, <= 0 an error occured
01274     @since 0.7.2
01275 */
01276 int burn_disc_get_cd_info(struct burn_drive *d, char disc_type[80],
01277                         unsigned int *disc_id, char bar_code[9], int *app_code,
01278             int *valid);
01279 
01280 /* ts B00924 */
01281 /** Read the current usage of the eventual BD Spare Area. This area gets
01282     reserved on BD media during formatting. During writing it is used to
01283     host replacements of blocks which failed the checkread immediately after
01284     writing.
01285     This call applies only to recordable BD media. I.e. profiles 0x41 to 0x43.
01286     @param d            The drive to query.
01287     @param alloc_blocks Returns the number of blocks reserved as Spare Area
01288     @param free_blocks  Returns the number of yet unused blocks in that area
01289     @param flag         Bitfield for control purposes (unused yet, submit 0)
01290     @return             1 = reply prarameters are valid,
01291                         <=0 = reply is invalid (e.g. because no BD profile)
01292     @since 0.8.8
01293 */
01294 int burn_disc_get_bd_spare_info(struct burn_drive *d,
01295                                 int *alloc_blocks, int *free_blocks, int flag);
01296 
01297 /* ts B10801 */
01298 /** Retrieve some media information which is mainly specific to media of
01299     the DVD-R family: DVD-R , DVD-RW , DVD-R DL , HD DVD-R
01300     Currently the information cannot be retrieved from other media types.
01301     @param d              The drive to query.
01302     @param disk_category  returns DVD Book to which the media complies
01303     @param book_name      returns a pointer to the book name of disk_category.
01304                           This memory is static. Do not alter or free it !
01305     @param part_version   returns the Media Version in the DVD Book
01306     @param num_layers     returns the number of media layers
01307     @param num_blocks     returns the number of blocks between pysical start
01308                           and physical end of the media
01309     @param flag           Bitfield for control purposes (unused yet, submit 0)
01310     @return               1 = reply prarameters are valid,
01311                           <=0 = reply is invalid (e.g. because no DVD-R)
01312     @since 1.1.4
01313 */
01314 int burn_disc_get_phys_format_info(struct burn_drive *d, int *disk_category,
01315                         char **book_name, int *part_version, int *num_layers,
01316                         int *num_blocks, int flag);
01317 
01318 /* ts A61110 */
01319 /** Read start lba and Next Writeable Address of a track from media.
01320     Usually a track lba is obtained from the result of burn_track_get_entry().
01321     This call retrieves an updated lba, eventual nwa, and can address the
01322     invisible track to come.
01323     The drive must be grabbed for this call. One may not issue this call
01324     during ongoing burn_disc_write() or burn_disc_erase().
01325     @param d The drive to query.
01326     @param o If not NULL: write parameters to be set on drive before query
01327     @param trackno 0=next track to come, >0 number of existing track
01328     @param lba return value: start lba
01329     @param nwa return value: Next Writeable Address
01330     @return 1=nwa is valid , 0=nwa is not valid , -1=error
01331     @since 0.2.6
01332 */
01333 int burn_disc_track_lba_nwa(struct burn_drive *d, struct burn_write_opts *o,
01334                 int trackno, int *lba, int *nwa);
01335 
01336 /* ts B10525 */
01337 /** Tells whether a previous attempt to determine the Next Writeable Address
01338     of the upcomming track reveiled that the READ TRACK INFORMATION Damage Bit
01339     is set for this track, resp. that no valid writable address is available. 
01340     See MMC-5 6.27.3.7 Damage Bit, 6.27.3.11 NWA_V (NWA valid)
01341     @param d     The drive to query.
01342     @param flag  Bitfield for control purposes (unused yet, submit 0)
01343     @return      0= Looks ok: Damage Bit is not set, NWA_V is set
01344                  1= Damaged and theoretically writable (NWA_V is set)
01345                  2= Not writable: NWA_V is not set
01346                  3= Damaged and not writable (NWA_V is not set),
01347     @since 1.1.0
01348 */
01349 int burn_disc_next_track_is_damaged(struct burn_drive *d, int flag);
01350 
01351 /* ts B10527 */
01352 /** Try to close the last track and session of media which have bit0 set in
01353     the return value of call burn_disc_next_track_is_damaged().
01354     Whether it helps depends much on the reason why the media is reported
01355     as damaged by the drive.
01356     This call works only for profiles 0x09 CD-R, 0x0a CD-RW, 0x11 DVD-R,
01357     0x14 DVD-RW sequential, 0x1b DVD+R, 0x2b DVD+R DL, 0x41 BD-R sequential.
01358     Note: After writing it is advised to give up the drive and to grab it again
01359           in order to learn about its view on the new media state.
01360     @param o     Write options created by burn_write_opts_new() and
01361                  manipulated by burn_write_opts_set_multi().
01362                  burn_write_opts_set_write_type() should be set to
01363                  BURN_WRITE_TAO, burn_write_opts_set_simulate() should be
01364                  set to 0.
01365     @param flag  Bitfield for control purposes
01366                  bit0= force close, even if no damage was seen
01367     @return      <=0 media not marked as damaged, or media type not suitable,
01368                      or closing attempted but failed
01369                  1= attempt finished without error indication
01370     @since 1.1.0
01371 */
01372 int burn_disc_close_damaged(struct burn_write_opts *o, int flag);
01373 
01374 
01375 /* ts A70131 */
01376 /** Read start lba of the first track in the last complete session.
01377     This is the first parameter of mkisofs option -C. The second parameter
01378     is nwa as obtained by burn_disc_track_lba_nwa() with trackno 0.
01379     @param d The drive to query.
01380     @param start_lba returns the start address of that track
01381     @return <= 0 : failure, 1 = ok 
01382     @since 0.3.2
01383 */
01384 int burn_disc_get_msc1(struct burn_drive *d, int *start_lba);
01385 
01386 
01387 /* ts A70213 */
01388 /** Return the best possible estimation of the currently available capacity of
01389     the media. This might depend on particular write option settings. For
01390     inquiring the space with such a set of options, the drive has to be
01391     grabbed and BURN_DRIVE_IDLE. If not, then one will only get a canned value
01392     from the most recent automatic inquiry (e.g. during last drive grabbing).
01393     An eventual start address from burn_write_opts_set_start_byte() will be
01394     subtracted from the obtained capacity estimation. Negative results get
01395     defaulted to 0.
01396     @param d The drive to query.
01397     @param o If not NULL: write parameters to be set on drive before query
01398     @return number of most probably available free bytes
01399     @since 0.3.4
01400 */
01401 off_t burn_disc_available_space(struct burn_drive *d,
01402                                 struct burn_write_opts *o);
01403 
01404 /* ts A61202 */
01405 /** Tells the MMC Profile identifier of the loaded media. The drive must be
01406     grabbed in order to get a non-zero result.
01407     libburn currently writes only to profiles 
01408       0x09 "CD-R"
01409       0x0a "CD-RW"
01410       0x11 "DVD-R sequential recording"
01411       0x12 "DVD-RAM"
01412       0x13 "DVD-RW restricted overwrite"
01413       0x14 "DVD-RW sequential recording",
01414       0x15 "DVD-R/DL sequential recording",
01415       0x1a "DVD+RW"
01416       0x1b "DVD+R",
01417       0x2b "DVD+R/DL",
01418       0x41 "BD-R sequential recording",
01419       0x43 "BD-RE",
01420       0xffff "stdio file"
01421     Note: 0xffff is not a MMC profile but a libburn invention.
01422     Read-only are the profiles
01423       0x08 "CD-ROM",
01424       0x10 "DVD-ROM",
01425       0x40 "BD-ROM",
01426     Read-only for now is this BD-R profile (testers wanted)
01427       0x42 "BD-R random recording"
01428     @param d The drive where the media is inserted.
01429     @param pno Profile Number. See also mmc5r03c.pdf, table 89
01430     @param name Profile Name (see above list, unknown profiles have empty name)
01431     @return 1 profile is valid, 0 no profile info available 
01432     @since 0.3.0
01433 */
01434 int burn_disc_get_profile(struct burn_drive *d, int *pno, char name[80]);
01435 
01436 
01437 /* ts A90903 : API */
01438 /** Obtain product id and standards defined media codes.
01439     The product id is a printable string which is supposed to be the same
01440     for identical media but should vary with non-identical media. Some media
01441     do not allow to obtain such an id at all. 
01442     The pair (profile_number, product_id) should be the best id to identify
01443     media with identical product specifications.
01444     The reply parameters media_code1 and media_code2 can be used with
01445     burn_guess_manufacturer()
01446     The reply parameters have to be disposed by free() when no longer needed.
01447     @param d           The drive where the media is inserted.
01448     @param product_id  Reply: Printable text depicting manufacturer and
01449                        eventually media id.
01450     @param media_code1 Reply: The eventual manufacturer identification as read
01451                        from DVD/BD media or a text "XXmYYsZZf" from CD media
01452                        ATIP lead-in.
01453     @param media_code2 The eventual media id as read from DVD+/BD media or a
01454                        text "XXmYYsZZf" from CD ATIP lead-out.
01455     @param book_type   Book type text for DVD and BD.
01456                        Caution: is NULL with CD, even if return value says ok.
01457     @param flag        Bitfield for control purposes
01458                        bit0= do not escape " _/" (not suitable for
01459                              burn_guess_manufacturer())
01460     @return            1= ok, product_id and media codes are valid,
01461                        0= no product id_available, reply parameters are NULL
01462                       <0= error
01463     @since 0.7.2
01464 */
01465 int burn_disc_get_media_id(struct burn_drive *d,
01466     char **product_id, char **media_code1, char **media_code2,
01467     char **book_type, int flag);
01468 
01469 
01470 /* ts A90904 */
01471 /** Guess the name of a manufacturer by profile number, manufacturer code
01472     and media code. The profile number can be obtained by
01473     burn_disc_get_profile(), the other two parameters can be obtained as
01474     media_code1 and media_code2 by burn_get_media_product_id().
01475     @param profile_no   Profile number (submit -1 if not known)
01476     @param manuf_code   Manufacturer code from media (e.g. "RICOHJPN")
01477     @param media_code   Media ID code from media (e.g. "W11")
01478     @param flag  Bitfield for control purposes, submit 0
01479     @return      Printable text or NULL on memory shortage.
01480                  If the text begins with "Unknown " then no item of the
01481                  manufacturer list matched the codes.
01482                  Dispose by free() when no longer needed.
01483     @since 0.7.2
01484 */
01485 char *burn_guess_manufacturer(int profile_no,
01486                  char *manuf_code, char *media_code, int flag);
01487 
01488 
01489 /** Tells whether a disc can be erased or not
01490     @param d The drive to inquire.
01491     @return Non-zero means erasable
01492 */
01493 int burn_disc_erasable(struct burn_drive *d);
01494 
01495 /** Returns the progress and status of a drive.
01496     @param drive The drive to query busy state for.
01497     @param p Returns the progress of the operation, NULL if you don't care
01498     @return the current status of the drive. See also burn_drive_status.
01499 */
01500 enum burn_drive_status burn_drive_get_status(struct burn_drive *drive,
01501                          struct burn_progress *p);
01502 
01503 /** Creates a write_opts struct for burning to the specified drive.
01504     The returned object must later be freed with burn_write_opts_free().
01505     @param drive The drive to write with
01506     @return The write_opts, NULL on error
01507 */
01508 struct burn_write_opts *burn_write_opts_new(struct burn_drive *drive);
01509 
01510 
01511 /* ts A70901 */
01512 /** Inquires the drive associated with a burn_write_opts object.
01513     @param opts object to inquire
01514     @return pointer to drive
01515     @since 0.4.0
01516 */
01517 struct burn_drive *burn_write_opts_get_drive(struct burn_write_opts *opts);
01518 
01519 
01520 /** Frees a write_opts struct created with burn_write_opts_new
01521     @param opts write_opts to free
01522 */
01523 void burn_write_opts_free(struct burn_write_opts *opts);
01524 
01525 /** Creates a read_opts struct for reading from the specified drive
01526     must be freed with burn_read_opts_free
01527     @param drive The drive to read from
01528     @return The read_opts
01529 */
01530 struct burn_read_opts *burn_read_opts_new(struct burn_drive *drive);
01531 
01532 /** Frees a read_opts struct created with burn_read_opts_new
01533     @param opts write_opts to free
01534 */
01535 void burn_read_opts_free(struct burn_read_opts *opts);
01536 
01537 /** Erase a disc in the drive. The drive must be grabbed successfully BEFORE
01538     calling this functions. Always ensure that the drive reports a status of
01539     BURN_DISC_FULL before calling this function. An erase operation is not
01540     cancellable, as control of the operation is passed wholly to the drive and
01541     there is no way to interrupt it safely.
01542     @param drive The drive with which to erase a disc.
01543                  Only drive roles 1 (MMC) and 5 (stdio random write-only)
01544                  support erasing.
01545     @param fast Nonzero to do a fast erase, where only the disc's headers are
01546                 erased; zero to erase the entire disc.
01547                 With DVD-RW, fast blanking yields media capable only of DAO.
01548 */
01549 void burn_disc_erase(struct burn_drive *drive, int fast);
01550 
01551 
01552 /* ts A70101 - A70417 */
01553 /** Format media for use with libburn. This currently applies to DVD-RW
01554     in state "Sequential Recording" (profile 0014h) which get formatted to
01555     state "Restricted Overwrite" (profile 0013h). DVD+RW can be "de-iced"
01556     by setting bit2 of flag. DVD-RAM and BD-RE may get formatted initially
01557     or re-formatted to adjust their Defect Managment.
01558     This function usually returns while the drive is still in the process
01559     of formatting. The formatting is done, when burn_drive_get_status()
01560     returns BURN_DRIVE_IDLE. This may be immediately after return or may
01561     need several thousand seconds to occur.
01562     @param drive The drive with the disc to format.
01563     @param size The size in bytes to be used with the format command. It should
01564                 be divisible by 32*1024. The effect of this parameter may
01565                 depend on the media profile and on parameter flag.
01566     @param flag Bitfield for control purposes:
01567                 bit0= after formatting, write the given number of zero-bytes
01568                       to the media and eventually perform preliminary closing.
01569                 bit1+2: size mode
01570                    0 = use parameter size as far as it makes sense
01571                    1 = insist in size 0 even if there is a better default known
01572                        (on DVD-RAM or BD-R identical to size mode 0,
01573                         i.e. they never get formatted with payload size 0)
01574                    2 = without bit7: format to maximum available size
01575                        with bit7   : take size from indexed format descriptor
01576                    3 = without bit7: format to default size
01577                        with bit7   : take size from indexed format descriptor
01578                 bit3= -reserved-
01579                 bit4= enforce re-format of (partly) formatted media
01580                 bit5= try to disable eventual defect management
01581         bit6= try to avoid lengthy media certification
01582                 bit7, bit8 to bit15 =
01583                       bit7 enables MMC expert application mode (else libburn
01584                       tries to choose a suitable format type):
01585                       If it is set then bit8 to bit15 contain the index of
01586                       the format to use. See burn_disc_get_formats(),
01587                       burn_disc_get_format_descr().
01588                       Acceptable types are: 0x00, 0x01, 0x10, 0x11, 0x13,
01589                       0x15, 0x26, 0x30, 0x31, 0x32.
01590                       If bit7 is set, then bit4 is set automatically.
01591                bit16= enable POW on blank BD-R
01592     @since 0.3.0
01593 */
01594 void burn_disc_format(struct burn_drive *drive, off_t size, int flag);
01595 
01596 
01597 /* ts A70112 */
01598 /* @since 0.3.0 */
01599 /** Possible formatting status values */
01600 #define BURN_FORMAT_IS_UNFORMATTED 1
01601 #define BURN_FORMAT_IS_FORMATTED   2
01602 #define BURN_FORMAT_IS_UNKNOWN     3
01603 
01604 /* ts A70112 */
01605 /** Inquire the formatting status, the associated sizes and the number of
01606     available formats.  The info is media specific and stems from MMC command
01607     23h READ FORMAT CAPACITY. See mmc5r03c.pdf 6.24 for background details.
01608     Media type can be determined via burn_disc_get_profile().
01609     @param drive The drive with the disc to format.
01610     @param status The current formatting status of the inserted media.
01611                   See BURN_FORMAT_IS_* macros. Note: "unknown" is the
01612                   legal status for quick formatted, yet unwritten DVD-RW.
01613     @param size The size in bytes associated with status.
01614                 unformatted: the maximum achievable size of the media
01615                 formatted:   the currently formatted capacity
01616                 unknown:     maximum capacity of drive or of media
01617     @param bl_sas Additional info "Block Length/Spare Area Size".
01618                   Expected to be constantly 2048 for non-BD media.
01619     @param num_formats The number of available formats. To be used with
01620                        burn_disc_get_format_descr() to obtain such a format
01621                        and eventually with burn_disc_format() to select one.
01622     @return 1 reply is valid , <=0 failure
01623     @since 0.3.0
01624 */
01625 int burn_disc_get_formats(struct burn_drive *drive, int *status, off_t *size,
01626                 unsigned *bl_sas, int *num_formats);
01627 
01628 /* ts A70112 */
01629 /** Inquire parameters of an available media format.
01630     @param drive The drive with the disc to format.
01631     @param index The index of the format item. Beginning with 0 up to reply
01632                  parameter from burn_disc_get_formats() : num_formats - 1
01633     @param type  The format type.  See mmc5r03c.pdf, 6.5, 04h FORMAT UNIT.
01634                  0x00=full, 0x10=CD-RW/DVD-RW full, 0x11=CD-RW/DVD-RW grow,
01635                  0x15=DVD-RW quick, 0x13=DVD-RW quick grow,
01636                  0x26=DVD+RW background, 0x30=BD-RE with spare areas,
01637                  0x31=BD-RE without spare areas
01638     @param size  The maximum size in bytes achievable with this format.
01639     @param tdp   Type Dependent Parameter. See mmc5r03c.pdf.
01640     @return 1 reply is valid , <=0 failure
01641     @since 0.3.0
01642 */
01643 int burn_disc_get_format_descr(struct burn_drive *drive, int index,
01644                 int *type, off_t *size, unsigned *tdp);
01645 
01646 
01647 
01648 /* ts A61109 : this was and is defunct */
01649 /** Read a disc from the drive and write it to an fd pair. The drive must be
01650     grabbed successfully BEFORE calling this function. Always ensure that the
01651     drive reports a status of BURN_DISC_FULL before calling this function.
01652     @param drive The drive from which to read a disc.
01653     @param o The options for the read operation.
01654 */
01655 void burn_disc_read(struct burn_drive *drive, const struct burn_read_opts *o);
01656 
01657 
01658 
01659 /* ts A70222 */
01660 /* @since 0.3.4 */
01661 /** The length of a rejection reasons string for burn_precheck_write() and
01662     burn_write_opts_auto_write_type() .
01663 */
01664 #define BURN_REASONS_LEN 4096
01665 
01666 
01667 /* ts A70219 */
01668 /** Examines a completed setup for burn_disc_write() whether it is permissible
01669     with drive and media. This function is called by burn_disc_write() but
01670     an application might be interested in this check in advance.
01671     @param o The options for the writing operation.
01672     @param disc The descrition of the disc to be created
01673     @param reasons Eventually returns a list of rejection reason statements
01674     @param silent 1= do not issue error messages , 0= report problems
01675     @return 1 ok, -1= no recordable media detected, 0= other failure
01676     @since 0.3.4
01677 */
01678 int burn_precheck_write(struct burn_write_opts *o, struct burn_disc *disc,
01679                         char reasons[BURN_REASONS_LEN], int silent);
01680 
01681 
01682 /** Write a disc in the drive. The drive must be grabbed successfully before
01683     calling this function. Always ensure that the drive reports a status of
01684     BURN_DISC_BLANK ot BURN_DISC_APPENDABLE before calling this function.
01685     Note: write_type BURN_WRITE_SAO is currently not capable of writing a mix
01686     of data and audio tracks. You must use BURN_WRITE_TAO for such sessions.
01687     To be set by burn_write_opts_set_write_type(). 
01688     Note: This function is not suitable for overwriting data in the middle of
01689           a valid data area because it is allowed to append trailing data.
01690           For exact random access overwriting use burn_random_access_write().
01691     Note: After writing it is advised to give up the drive and to grab it again
01692           in order to learn about its view on the new media state.
01693     Note: Before mounting the written media it might be necessary to eject
01694           and reload in order to allow the operating system to notice the new
01695           media state.
01696     @param o The options for the writing operation.
01697     @param disc The struct burn_disc * that described the disc to be created
01698 */
01699 void burn_disc_write(struct burn_write_opts *o, struct burn_disc *disc);
01700 
01701 
01702 /* ts A90227 */
01703 /** Control stream recording during the write run and eventually set the start
01704     LBA for stream recording.
01705     Stream recording is set from struct burn_write_opts when the write run
01706     gets started. See burn_write_opts_set_stream_recording().
01707     The call described here can be used later to override this setting and
01708     to program automatic switching at a given LBA. It also affects subsequent
01709     calls to burn_random_access_write().
01710     @param drive    The drive which performs the write operation.
01711     @param recmode  -1= disable stream recording
01712                      0= leave setting as is
01713                      1= enable stream recording
01714     @param start    The LBA where actual stream recording shall start.
01715                     (0 means unconditional stream recording)
01716     @param flag     Bitfield for control purposes (unused yet, submit 0).
01717     @return         1=success , <=0 failure
01718     @since 0.6.4
01719 */
01720 int burn_drive_set_stream_recording(struct burn_drive *drive, int recmode,
01721                                     int start, int flag);
01722 
01723 /** Cancel an operation on a drive.
01724     This will only work when the drive's busy state is BURN_DRIVE_READING or
01725     BURN_DRIVE_WRITING.
01726     @param drive The drive on which to cancel the current operation.
01727 */
01728 void burn_drive_cancel(struct burn_drive *drive);
01729 
01730 
01731 /* ts A61223 */
01732 /** Inquire whether the most recent asynchronous media job was successful.
01733     This applies to burn_disc_erase(), burn_disc_format(), burn_disc_write().
01734     Reasons for non-success may be: rejection of burn parameters, abort due to
01735     fatal errors during write, blank or format, a call to burn_drive_cancel()
01736     by the application thread.
01737     @param d The drive to inquire.
01738     @return 1=burn seems to have went well, 0=burn failed 
01739     @since 0.2.6
01740 */
01741 int burn_drive_wrote_well(struct burn_drive *d);
01742 
01743 
01744 /** Convert a minute-second-frame (MSF) value to sector count
01745     @param m Minute component
01746     @param s Second component
01747     @param f Frame component
01748     @return The sector count
01749 */
01750 int burn_msf_to_sectors(int m, int s, int f);
01751 
01752 /** Convert a sector count to minute-second-frame (MSF)
01753     @param sectors The sector count
01754     @param m Returns the minute component
01755     @param s Returns the second component
01756     @param f Returns the frame component
01757 */
01758 void burn_sectors_to_msf(int sectors, int *m, int *s, int *f);
01759 
01760 /** Convert a minute-second-frame (MSF) value to an lba
01761     @param m Minute component
01762     @param s Second component
01763     @param f Frame component
01764     @return The lba
01765 */
01766 int burn_msf_to_lba(int m, int s, int f);
01767 
01768 /** Convert an lba to minute-second-frame (MSF)
01769     @param lba The lba
01770     @param m Returns the minute component
01771     @param s Returns the second component
01772     @param f Returns the frame component
01773 */
01774 void burn_lba_to_msf(int lba, int *m, int *s, int *f);
01775 
01776 /** Create a new disc
01777     @return Pointer to a burn_disc object or NULL on failure.
01778 */
01779 struct burn_disc *burn_disc_create(void);
01780 
01781 /** Delete disc and decrease the reference count on all its sessions
01782     @param d The disc to be freed
01783 */
01784 void burn_disc_free(struct burn_disc *d);
01785 
01786 /** Create a new session
01787     @return Pointer to a burn_session object or NULL on failure.
01788  */
01789 struct burn_session *burn_session_create(void);
01790 
01791 /** Free a session (and decrease reference count on all tracks inside)
01792     @param s Session to be freed
01793 */
01794 void burn_session_free(struct burn_session *s);
01795 
01796 /** Add a session to a disc at a specific position, increasing the 
01797     sessions's reference count.
01798     @param d Disc to add the session to
01799     @param s Session to add to the disc
01800     @param pos position to add at (BURN_POS_END is "at the end")
01801     @return 0 for failure, 1 for success
01802 */
01803 int burn_disc_add_session(struct burn_disc *d, struct burn_session *s,
01804               unsigned int pos);
01805 
01806 /** Remove a session from a disc
01807     @param d Disc to remove session from
01808     @param s Session pointer to find and remove
01809 */
01810 int burn_disc_remove_session(struct burn_disc *d, struct burn_session *s);
01811 
01812 
01813 /** Create a track (for TAO recording, or to put in a session) */
01814 struct burn_track *burn_track_create(void);
01815 
01816 /** Free a track
01817     @param t Track to free
01818 */
01819 void burn_track_free(struct burn_track *t);
01820 
01821 /** Add a track to a session at specified position
01822     @param s Session to add to
01823     @param t Track to insert in session
01824     @param pos position to add at (BURN_POS_END is "at the end")
01825     @return 0 for failure, 1 for success
01826 */
01827 int burn_session_add_track(struct burn_session *s, struct burn_track *t,
01828                unsigned int pos);
01829 
01830 /** Remove a track from a session
01831     @param s Session to remove track from
01832     @param t Track pointer to find and remove
01833     @return 0 for failure, 1 for success
01834 */
01835 int burn_session_remove_track(struct burn_session *s, struct burn_track *t);
01836 
01837 
01838 /** Define the data in a track
01839     @param t the track to define
01840     @param offset The lib will write this many 0s before start of data
01841     @param tail The number of extra 0s to write after data
01842     @param pad 1 means the lib should pad the last sector with 0s if the
01843            track isn't exactly sector sized.  (otherwise the lib will
01844            begin reading from the next track)
01845     @param mode data format (bitfield)
01846 */
01847 void burn_track_define_data(struct burn_track *t, int offset, int tail,
01848                 int pad, int mode);
01849 
01850 
01851 /* ts A61024 */
01852 /** Define whether a track shall swap bytes of its input stream.
01853     @param t The track to change
01854     @param swap_source_bytes 0=do not swap, 1=swap byte pairs
01855     @return 1=success , 0=unacceptable value
01856     @since 0.2.6
01857 */
01858 int burn_track_set_byte_swap(struct burn_track *t, int swap_source_bytes);
01859 
01860 
01861 /* ts A90910 */
01862 /** Activates CD XA compatibility modes.
01863     libburn currently writes data only in CD mode 1. Some programs insist in
01864     sending data with additional management bytes. These bytes have to be
01865     stripped in order to make the input suitable for BURN_MODE1.
01866     @param t     The track to manipulate
01867     @param value 0= no conversion
01868                  1= strip 8 byte sector headers of CD-ROM XA mode 2 form 1
01869                     see MMC-5 4.2.3.8.5.3 Block Format for Mode 2 form 1 Data
01870                  all other values are reserved
01871     @return 1=success , 0=unacceptable value
01872     @since 0.7.2
01873 */
01874 int burn_track_set_cdxa_conv(struct burn_track *t, int value);
01875 
01876 
01877 /** Set the ISRC details for a track
01878     @param t The track to change
01879     @param country the 2 char country code. Each character must be
01880            only numbers or letters.
01881     @param owner 3 char owner code. Each character must be only numbers
01882            or letters.
01883     @param year 2 digit year. A number in 0-99 (Yep, not Y2K friendly).
01884     @param serial 5 digit serial number. A number in 0-99999.
01885 */
01886 void burn_track_set_isrc(struct burn_track *t, char *country, char *owner,
01887              unsigned char year, unsigned int serial);
01888 
01889 /** Disable ISRC parameters for a track
01890     @param t The track to change
01891 */
01892 void burn_track_clear_isrc(struct burn_track *t);
01893 
01894 /** Hide the first track in the "pre gap" of the disc
01895     @param s session to change
01896     @param onoff 1 to enable hiding, 0 to disable
01897 */
01898 void burn_session_hide_first_track(struct burn_session *s, int onoff);
01899 
01900 /** Get the drive's disc struct - free when done
01901     @param d drive to query
01902     @return the disc struct or NULL on failure
01903 */
01904 struct burn_disc *burn_drive_get_disc(struct burn_drive *d);
01905 
01906 /** Set the track's data source
01907     @param t The track to set the data source for
01908     @param s The data source to use for the contents of the track
01909     @return An error code stating if the source is ready for use for
01910             writing the track, or if an error occured
01911     
01912 */
01913 enum burn_source_status burn_track_set_source(struct burn_track *t,
01914                           struct burn_source *s);
01915 
01916 
01917 /* ts A70218 */
01918 /** Set a default track size to be used only if the track turns out to be of
01919     unpredictable length and if the effective write type demands a fixed size.
01920     This can be useful to enable write types CD SAO or DVD DAO together with
01921     a track source like stdin. If the track source delivers fewer bytes than
01922     announced then the track will be padded up with zeros.
01923     @param t The track to change
01924     @param size The size to set
01925     @return 0=failure 1=sucess
01926     @since 0.3.4
01927 */
01928 int burn_track_set_default_size(struct burn_track *t, off_t size);
01929 
01930 /** Free a burn_source (decrease its refcount and maybe free it)
01931     @param s Source to free
01932 */
01933 void burn_source_free(struct burn_source *s);
01934 
01935 /** Creates a data source for an image file (and maybe subcode file)
01936     @param path The file address for the main channel payload.
01937     @param subpath Eventual address for subchannel data. Only used in exotic
01938                    raw write modes. Submit NULL for normal tasks.
01939     @return Pointer to a burn_source object, NULL indicates failure
01940 */
01941 struct burn_source *burn_file_source_new(const char *path,
01942                      const char *subpath);
01943 
01944 
01945 /* ts A91122 : An interface to open(O_DIRECT) or similar OS tricks. */
01946 
01947 /** Opens a file with eventual acceleration preparations which may depend
01948     on the operating system and on compile time options of libburn.
01949     You may use this call instead of open(2) for opening file descriptors
01950     which shall be handed to burn_fd_source_new().
01951     This should only be done for tracks with BURN_BLOCK_MODE1 (2048 bytes
01952     per block).
01953 
01954     If you use this call then you MUST allocate the buffers which you use
01955     with read(2) by call burn_os_alloc_buffer(). Read sizes MUST be a multiple
01956     of a safe buffer amount. Else you risk that track data get altered during
01957     transmission.
01958     burn_disk_write() will allocate a suitable read/write buffer for its own
01959     operations. A fifo created by burn_fifo_source_new() will allocate
01960     suitable memory for its buffer if called with flag bit0 and a multiple
01961     of a safe buffer amount. 
01962     @param path       The file address to open
01963     @param open_flags The flags as of man 2 open. Normally just O_RDONLY.
01964     @param flag       Bitfield for control purposes (unused yet, submit 0).
01965     @return           A file descriptor as of open(2). Finally to be disposed
01966                       by close(2).
01967                       -1 indicates failure.
01968     @since 0.7.4
01969 */
01970 int burn_os_open_track_src(char *path, int open_flags, int flag);
01971 
01972 /** Allocate a memory area that is suitable for reading with a file descriptor
01973     opened by burn_os_open_track_src().
01974     @param amount     Number of bytes to allocate. This should be a multiple
01975                       of the operating system's i/o block size. 32 KB is
01976                       guaranteed by libburn to be safe.
01977     @param flag       Bitfield for control purposes (unused yet, submit 0).
01978     @return           The address of the allocated memory, or NULL on failure.
01979                       A non-NULL return value has finally to be disposed via
01980                       burn_os_free_buffer().
01981     @since 0.7.4
01982 */
01983 void *burn_os_alloc_buffer(size_t amount, int flag);
01984 
01985 /** Dispose a memory area which was obtained by burn_os_alloc_buffer(),
01986     @param buffer     Memory address to be freed.
01987     @param amount     The number of bytes which was allocated at that
01988                       address.
01989     @param flag       Bitfield for control purposes (unused yet, submit 0).
01990     @return           1 success , <=0 failure
01991     @since 0.7.4
01992 */
01993 int burn_os_free_buffer(void *buffer, size_t amount, int flag);
01994 
01995 
01996 /** Creates a data source for an image file (a track) from an open
01997     readable filedescriptor, an eventually open readable subcodes file
01998     descriptor and eventually a fixed size in bytes.
01999     @param datafd The source of data.
02000     @param subfd The eventual source of subchannel data. Only used in exotic
02001                  raw write modes. Submit -1 for normal tasks.
02002     @param size The eventual fixed size of eventually both fds. 
02003                 If this value is 0, the size will be determined from datafd.
02004     @return Pointer to a burn_source object, NULL indicates failure
02005 */
02006 struct burn_source *burn_fd_source_new(int datafd, int subfd, off_t size);
02007 
02008 
02009 /* ts B00922 */
02010 /** Creates an offset source which shall provide a byte interval of a stream
02011     to its consumer. It is supposed to be chain-linked with other offset
02012     sources which serve neighboring consumers. The chronological sequence
02013     of consumers and the sequence of offset sources must match. The intervals
02014     of the sources must not overlap.
02015 
02016     A chain of these burn_source objects may be used to feed multiple tracks
02017     from one single stream of input bytes.
02018     Each of the offset sources will skip the bytes up to its start address and
02019     provide the prescribed number of bytes to the track. Skipping takes into
02020     respect the bytes which have been processed by eventual predecessors in the
02021     chain.
02022     Important: It is not allowed to free an offset source before its successor
02023                has ended its work. Best is to keep them all until all tracks
02024                are done.
02025 
02026     @param inp   The burn_source object from which to read stream data.
02027                  E.g. created by burn_file_source_new().
02028     @param prev  The eventual offset source object which shall read data from
02029                  inp before the new offset source will begin its own work.
02030                  This must either be a result of  burn_offst_source_new()  or
02031                  it must be NULL.
02032     @param start The byte address where to start reading bytes for the
02033                  consumer. inp bytes may get skipped to reach this address.
02034     @param size  The number of bytes to be delivered to the consumer.
02035     @param flag  Bitfield for control purposes (unused yet, submit 0).
02036     @return      Pointer to a burn_source object, later to be freed by
02037                  burn_source_free(). NULL indicates failure.
02038     @since 0.8.8
02039 */
02040 struct burn_source *burn_offst_source_new(
02041                 struct burn_source *inp, struct burn_source *prev,
02042                 off_t start, off_t size, int flag);
02043 
02044 /* ts A70930 */
02045 /** Creates a fifo which acts as proxy for an already existing data source.
02046     The fifo provides a ring buffer which shall smoothen the data stream
02047     between burn_source and writer thread. Each fifo serves only for one
02048     data source and gets attached to one track as its only data source
02049     by burn_track_set_source().
02050     A fifo starts its life in "standby" mode with no buffer space allocated.
02051     As soon as its track requires bytes, the fifo establishes a worker thread
02052     and allocates its buffer. After input has ended and all buffer content is
02053     consumed, the buffer space gets freed and the worker thread ends.
02054     This happens asynchronously. So expect two buffers and worker threads to
02055     exist for a short time between tracks. Be modest in your size demands if
02056     multiple tracks are to be expected. 
02057     @param inp        The burn_source for which the fifo shall act as proxy.
02058                       It can be disposed by burn_source_free() immediately
02059                       after this call.
02060     @param chunksize  The size in bytes of a chunk.
02061                       Use 2048 for sources suitable for BURN_BLOCK_MODE1,
02062                       2352 for sources which deliver for BURN_BLOCK_AUDIO,
02063                       2056 for sources which shall get treated by 
02064                       burn_track_set_cdxa_conv(track, 1).
02065                       Some variations of burn_source might work only with
02066                       a particular chunksize. E.g. libisofs demands 2048.
02067     @param chunks     The number of chunks to be allocated in ring buffer.
02068                       This value must be >= 2.
02069     @param flag       Bitfield for control purposes:
02070                       bit0= The read method of inp is capable of delivering
02071                             arbitrary amounts of data per call. Not only one
02072                             sector.
02073                             Suitable for inp from burn_file_source_new()
02074                             and burn_fd_source_new() if not the fd has
02075                             exotic limitations on read size.
02076                             You MUST use this on inp which uses an fd opened
02077                             with burn_os_open_track_src().
02078                             Better do not use with other inp types.
02079                             @since 0.7.4
02080     @return           A pointer to the newly created burn_source.
02081                       Later both burn_sources, inp and the returned fifo, have
02082                       to be disposed by calling burn_source_free() for each.
02083                       inp can be freed immediately, the returned fifo may be
02084                       kept as handle for burn_fifo_inquire_status().
02085     @since 0.4.0
02086 */
02087 struct burn_source *burn_fifo_source_new(struct burn_source *inp,
02088                                          int chunksize, int chunks, int flag);
02089 
02090 /* ts A71003 */
02091 /** Inquires state and fill parameters of a fifo burn_source which was created
02092     by burn_fifo_source_new() . Do not use with other burn_source variants.
02093     @param fifo  The fifo object to inquire
02094     @param size  The total size of the fifo
02095     @param free_bytes  The current free capacity of the fifo
02096     @param status_text  Returns a pointer to a constant text, see below
02097     @return  <0 reply invalid, >=0 fifo status code:
02098              bit0+1=input status, bit2=consumption status, i.e:
02099              0="standby"   : data processing not started yet
02100              1="active"    : input and consumption are active
02101              2="ending"    : input has ended without error
02102              3="failing"   : input had error and ended,
02103              4="unused"    : ( consumption has ended before processing start )
02104              5="abandoned" : consumption has ended prematurely
02105              6="ended"     : consumption has ended without input error
02106              7="aborted"   : consumption has ended after input error
02107     @since 0.4.0
02108 */
02109 int burn_fifo_inquire_status(struct burn_source *fifo, int *size, 
02110                             int *free_bytes, char **status_text);
02111 
02112 /* ts A91125 */
02113 /** Inquire various counters which reflect the fifo operation.
02114     @param fifo              The fifo object to inquire
02115     @param total_min_fill    The minimum number of bytes in the fifo. Beginning
02116                              from the moment when fifo consumption is enabled.
02117     @param interval_min_fill The minimum byte number beginning from the moment
02118                              when fifo consumption is enabled or from the
02119                              most recent moment when burn_fifo_next_interval()
02120                              was called.
02121     @param put_counter       The number of data transactions into the fifo.
02122     @param get_counter       The number of data transactions out of the fifo.
02123     @param empty_counter     The number of times the fifo was empty.
02124     @param full_counter      The number of times the fifo was full.
02125     @since 0.7.4
02126 */
02127 void burn_fifo_get_statistics(struct burn_source *fifo,
02128                              int *total_min_fill, int *interval_min_fill,
02129                              int *put_counter, int *get_counter,
02130                              int *empty_counter, int *full_counter);
02131 
02132 /* ts A91125 */
02133 /** Inquire the fifo minimum fill counter for intervals and reset that counter.
02134     @param fifo              The fifo object to inquire
02135     @param interval_min_fill The minimum number of bytes in the fifo. Beginning
02136                              from the moment when fifo consumption is enabled
02137                              or from the most recent moment when
02138                              burn_fifo_next_interval() was called.
02139     @since 0.7.4
02140 */
02141 void burn_fifo_next_interval(struct burn_source *fifo, int *interval_min_fill);
02142 
02143 /* ts A80713 */
02144 /** Obtain a preview of the first input data of a fifo which was created
02145     by burn_fifo_source_new(). The data will later be delivered normally to
02146     the consumer track of the fifo.
02147     bufsize may not be larger than the fifo size (chunk_size * chunks) - 32k.
02148     This call will succeed only if data consumption by the track has not
02149     started yet, i.e. best before the call to burn_disc_write().
02150     It will start the worker thread of the fifo with the expectable side
02151     effects on the external data source. Then it waits either until enough
02152     data have arrived or until it becomes clear that this will not happen.
02153     The call may be repeated with increased bufsize. It will always yield
02154     the bytes beginning from the first one in the fifo.
02155     @param fifo     The fifo object to inquire resp. start
02156     @param buf      Pointer to memory of at least bufsize bytes where to
02157                     deliver the peeked data.
02158     @param bufsize  Number of bytes to peek from the start of the fifo data
02159     @param flag     Bitfield for control purposes (unused yet, submit 0).
02160     @return <0 on severe error, 0 if not enough data, 1 if bufsize bytes read
02161     @since 0.5.0
02162 */
02163 int burn_fifo_peek_data(struct burn_source *fifo, char *buf, int bufsize,
02164                         int flag);
02165 
02166 /* ts A91125 */
02167 /** Start the fifo worker thread and wait either until the requested number
02168     of bytes have arrived or until it becomes clear that this will not happen.
02169     Filling will go on asynchronously after burn_fifo_fill() returned.
02170     This call and burn_fifo_peek_data() do not disturb each other.
02171     @param fifo     The fifo object to start
02172     @param fill     Number of bytes desired. Expect to get return 1 if 
02173                     at least fifo size - 32k were read.
02174     @param flag     Bitfield for control purposes.
02175                     bit0= fill fifo to maximum size
02176     @return <0 on severe error, 0 if not enough data,
02177              1 if desired amount or fifo full
02178     @since 0.7.4
02179 */
02180 int burn_fifo_fill(struct burn_source *fifo, int fill, int flag);
02181 
02182 
02183 /* ts A70328 */
02184 /** Sets a fixed track size after the data source object has already been
02185     created.
02186     @param t The track to operate on
02187     @param size the number of bytes to use as track size
02188     @return <=0 indicates failure , >0 success
02189     @since 0.3.6
02190 */
02191 int burn_track_set_size(struct burn_track *t, off_t size);
02192 
02193 
02194 /** Tells how long a track will be on disc
02195     >>> NOTE: Not reliable with tracks of undefined length
02196 */
02197 int burn_track_get_sectors(struct burn_track *);
02198 
02199 
02200 /* ts A61101 */
02201 /** Tells how many source bytes have been read and how many data bytes have
02202     been written by the track during burn.
02203     @param t The track to inquire
02204     @param read_bytes Number of bytes read from the track source
02205     @param written_bytes Number of bytes written to track
02206     @since 0.2.6
02207 */
02208 int burn_track_get_counters(struct burn_track *t, 
02209                             off_t *read_bytes, off_t *written_bytes);
02210 
02211 
02212 /** Sets drive read and write speed
02213     Note: "k" is 1000, not 1024. 1xCD = 176.4 k/s, 1xDVD = 1385 k/s.
02214           Fractional speeds should be rounded up. Like 4xCD = 706.
02215     @param d The drive to set speed for
02216     @param read Read speed in k/s (0 is max, -1 is min).
02217     @param write Write speed in k/s (0 is max, -1 is min). 
02218 */
02219 void burn_drive_set_speed(struct burn_drive *d, int read, int write);
02220 
02221 
02222 /* ts A70711 */
02223 /** Controls the behavior with writing when the drive buffer is suspected to
02224     be full. To check and wait for enough free buffer space before writing
02225     will move the task of waiting from the operating system's device driver
02226     to libburn. While writing is going on and waiting is enabled, any write
02227     operation will be checked whether it will fill the drive buffer up to
02228     more than max_percent. If so, then waiting will happen until the buffer
02229     fill is predicted with at most min_percent.
02230     Thus: if min_percent < max_percent then transfer rate will oscillate. 
02231     This may allow the driver to operate on other devices, e.g. a disk from
02232     which to read the input for writing. On the other hand, this checking might
02233     reduce maximum throughput to the drive or even get misled by faulty buffer
02234     fill replies from the drive.
02235     If a setting parameter is < 0, then this setting will stay unchanged
02236     by the call.
02237     Known burner or media specific pitfalls:
02238     To have max_percent larger than the burner's best reported buffer fill has
02239     the same effect as min_percent==max_percent. Some burners do not report
02240     their full buffer with all media types. Some are not suitable because
02241     they report their buffer fill with delay.
02242     @param d The drive to control
02243     @param enable 0= disable , 1= enable waiting , (-1 = do not change setting)
02244     @param min_usec Shortest possible sleeping period (given in micro seconds)
02245     @param max_usec Longest possible sleeping period (given in micro seconds)
02246     @param timeout_sec If a single write has to wait longer than this number
02247                        of seconds, then waiting gets disabled and mindless
02248                        writing starts. A value of 0 disables this timeout.
02249     @param min_percent Minimum of desired buffer oscillation: 25 to 100
02250     @param max_percent Maximum of desired buffer oscillation: 25 to 100
02251     @return 1=success , 0=failure
02252     @since 0.3.8
02253 */
02254 int burn_drive_set_buffer_waiting(struct burn_drive *d, int enable,
02255                                 int min_usec, int max_usec, int timeout_sec,
02256                                 int min_percent, int max_percent);
02257 
02258 
02259 /* these are for my debugging, they will disappear */
02260 void burn_structure_print_disc(struct burn_disc *d);
02261 void burn_structure_print_session(struct burn_session *s);
02262 void burn_structure_print_track(struct burn_track *t);
02263 
02264 /** Sets the write type for the write_opts struct.
02265     Note: write_type BURN_WRITE_SAO is currently not capable of writing a mix
02266     of data and audio tracks. You must use BURN_WRITE_TAO for such sessions.
02267     @param opts The write opts to change
02268     @param write_type The write type to use
02269     @param block_type The block type to use
02270     @return Returns 1 on success and 0 on failure.
02271 */
02272 int burn_write_opts_set_write_type(struct burn_write_opts *opts,
02273                    enum burn_write_types write_type,
02274                    int block_type);
02275 
02276 
02277 /* ts A70207 */
02278 /** As an alternative to burn_write_opts_set_write_type() this function tries
02279     to find a suitable write type and block type for a given write job
02280     described by opts and disc. To be used after all other setups have been
02281     made, i.e. immediately before burn_disc_write().
02282     @param opts The nearly complete write opts to change
02283     @param disc The already composed session and track model
02284     @param reasons This text string collects reasons for decision resp. failure
02285     @param flag Bitfield for control purposes:
02286                 bit0= do not choose type but check the one that is already set
02287                 bit1= do not issue error messages via burn_msgs queue
02288                       (is automatically set with bit0)
02289     @return Chosen write type. BURN_WRITE_NONE on failure.
02290     @since 0.3.2
02291 */
02292 enum burn_write_types burn_write_opts_auto_write_type(
02293           struct burn_write_opts *opts, struct burn_disc *disc,
02294           char reasons[BURN_REASONS_LEN], int flag);
02295 
02296 
02297 /** Supplies toc entries for writing - not normally required for cd mastering
02298     @param opts The write opts to change
02299     @param count The number of entries
02300     @param toc_entries
02301 */
02302 void burn_write_opts_set_toc_entries(struct burn_write_opts *opts,
02303                      int count,
02304                      struct burn_toc_entry *toc_entries);
02305 
02306 /** Sets the session format for a disc
02307     @param opts The write opts to change
02308     @param format The session format to set
02309 */
02310 void burn_write_opts_set_format(struct burn_write_opts *opts, int format);
02311 
02312 /** Sets the simulate value for the write_opts struct . 
02313     This corresponds to the Test Write bit in MMC mode page 05h. Several media
02314     types do not support this. See struct burn_multi_caps.might_simulate for
02315     actual availability of this feature. 
02316     If the media is suitable, the drive will perform burn_disc_write() as a
02317     simulation instead of effective write operations. This means that the
02318     media content and burn_disc_get_status() stay unchanged.
02319     Note: With stdio-drives, the target file gets eventually created, opened,
02320           lseeked, and closed, but not written. So there are effects on it.
02321     Warning: Call burn_random_access_write() will never do simulation because
02322              it does not get any burn_write_opts.
02323     @param opts The write opts to change
02324     @param sim  Non-zero enables simulation, 0 enables real writing
02325     @return Returns 1 on success and 0 on failure.
02326 */
02327 int  burn_write_opts_set_simulate(struct burn_write_opts *opts, int sim);
02328 
02329 /** Controls buffer underrun prevention
02330     @param opts The write opts to change
02331     @param underrun_proof if non-zero, buffer underrun protection is enabled
02332     @return Returns 1 on success and 0 on failure.
02333 */
02334 int burn_write_opts_set_underrun_proof(struct burn_write_opts *opts,
02335                        int underrun_proof);
02336 
02337 /** Sets whether to use opc or not with the write_opts struct
02338     @param opts The write opts to change
02339     @param opc If non-zero, optical power calibration will be performed at
02340                start of burn
02341      
02342 */
02343 void burn_write_opts_set_perform_opc(struct burn_write_opts *opts, int opc);
02344 
02345 void burn_write_opts_set_has_mediacatalog(struct burn_write_opts *opts, int has_mediacatalog);
02346 
02347 void burn_write_opts_set_mediacatalog(struct burn_write_opts *opts, unsigned char mediacatalog[13]);
02348 
02349 
02350 /* ts A61106 */
02351 /** Sets the multi flag which eventually marks the emerging session as not
02352     being the last one and thus creating a BURN_DISC_APPENDABLE media.
02353     Note: DVD-R[W] in write mode BURN_WRITE_SAO are not capable of this.
02354           DVD-R DL are not capable of this at all.
02355           libburn will refuse to write if burn_write_opts_set_multi() is
02356           enabled under such conditions.
02357     @param opts The option object to be manipulated
02358     @param multi 1=media will be appendable, 0=media will be closed (default) 
02359     @since 0.2.6
02360 */
02361 void burn_write_opts_set_multi(struct burn_write_opts *opts, int multi);
02362 
02363 
02364 /* ts A61222 */
02365 /** Sets a start address for writing to media and write modes which allow to
02366     choose this address at all (for now: DVD+RW, DVD-RAM, formatted DVD-RW).
02367     now). The address is given in bytes. If it is not -1 then a write run
02368     will fail if choice of start address is not supported or if the block
02369     alignment of the address is not suitable for media and write mode.
02370     Alignment to 32 kB blocks is supposed to be safe with DVD media.
02371     Call burn_disc_get_multi_caps() can obtain the necessary media info. See
02372     resulting struct burn_multi_caps elements .start_adr , .start_alignment ,
02373     .start_range_low , .start_range_high .
02374     @param opts The write opts to change
02375     @param value The address in bytes (-1 = start at default address)
02376     @since 0.3.0
02377 */
02378 void burn_write_opts_set_start_byte(struct burn_write_opts *opts, off_t value);
02379 
02380 
02381 /* ts A70213 */
02382 /** Caution: still immature and likely to change. Problems arose with
02383     sequential DVD-RW on one drive.
02384 
02385     Controls whether the whole available space of the media shall be filled up
02386     by the last track of the last session.
02387     @param opts The write opts to change
02388     @param fill_up_media If 1 : fill up by last track, if 0 = do not fill up
02389     @since 0.3.4
02390 */
02391 void burn_write_opts_set_fillup(struct burn_write_opts *opts,
02392                                 int fill_up_media);
02393 
02394 
02395 /* ts A70303 */
02396 /** Eventually makes libburn ignore the failure of some conformance checks:
02397     - the check whether CD write+block type is supported by the drive
02398     - the check whether the media profile supports simulated burning 
02399     @param opts The write opts to change
02400     @param use_force 1=ignore above checks, 0=refuse work on failed check
02401     @since 0.3.4
02402 */
02403 void burn_write_opts_set_force(struct burn_write_opts *opts, int use_force);
02404 
02405 
02406 /* ts A80412 */
02407 /** Eventually makes use of the more modern write command AAh WRITE12 and
02408     sets the Streaming bit. With DVD-RAM and BD this can override the
02409     traditional slowdown to half nominal speed. But if it speeds up writing
02410     then it also disables error management and correction. Weigh your
02411     priorities. This affects the write operations of burn_disc_write()
02412     and subsequent calls of burn_random_access_write().
02413     @param opts The write opts to change
02414     @param value  0=use 2Ah WRITE10, 1=use AAh WRITE12 with Streaming bit
02415                   @since 0.6.4:
02416                   >=16 use WRITE12 but not before the LBA given by value
02417     @since 0.4.6
02418 */
02419 void burn_write_opts_set_stream_recording(struct burn_write_opts *opts, 
02420                                          int value);
02421 
02422 /* ts A91115 */
02423 /** Overrides the write chunk size for DVD and BD media which is normally
02424     determined according to media type and setting of stream recording.
02425     A chunk size of 64 KB may improve throughput with bus systems which show
02426     latency problems.
02427     @param opts The write opts to change
02428     @param obs  Number of bytes which shall be sent by a single write command.
02429                 0 means automatic size, 32768 and 65336 are the only other
02430                 accepted sizes for now.
02431     @since 0.7.4
02432 */
02433 void burn_write_opts_set_dvd_obs(struct burn_write_opts *opts, int obs);
02434 
02435 /* ts A91115 */
02436 /** Sets the rythm by which stdio pseudo drives force their output data to
02437     be consumed by the receiving storage device. This forcing keeps the memory
02438     from being clogged with lots of pending data for slow devices.
02439     @param opts   The write opts to change
02440     @param rythm  Number of 2KB output blocks after which fsync(2) is
02441                   performed. -1 means no fsync(), 0 means default,
02442                   elsewise the value must be >= 32.
02443                   Default is currently 8192 = 16 MB.
02444     @since 0.7.4
02445 */
02446 void burn_write_opts_set_stdio_fsync(struct burn_write_opts *opts, int rythm);
02447 
02448 
02449 /** Sets whether to read in raw mode or not
02450     @param opts The read opts to change
02451     @param raw_mode If non-zero, reading will be done in raw mode, so that everything in the data tracks on the
02452             disc is read, including headers.
02453 */
02454 void burn_read_opts_set_raw(struct burn_read_opts *opts, int raw_mode);
02455 
02456 /** Sets whether to report c2 errors or not 
02457     @param opts The read opts to change
02458     @param c2errors If non-zero, report c2 errors.
02459 */
02460 void burn_read_opts_set_c2errors(struct burn_read_opts *opts, int c2errors);
02461 
02462 /** Sets whether to read subcodes from audio tracks or not
02463     @param opts The read opts to change
02464     @param subcodes_audio If non-zero, read subcodes from audio tracks on the disc.
02465 */
02466 void burn_read_opts_read_subcodes_audio(struct burn_read_opts *opts,
02467                     int subcodes_audio);
02468 
02469 /** Sets whether to read subcodes from data tracks or not 
02470     @param opts The read opts to change
02471     @param subcodes_data If non-zero, read subcodes from data tracks on the disc.
02472 */
02473 void burn_read_opts_read_subcodes_data(struct burn_read_opts *opts,
02474                        int subcodes_data);
02475 
02476 /** Sets whether to recover errors if possible
02477     @param opts The read opts to change
02478     @param hardware_error_recovery If non-zero, attempt to recover errors if possible.
02479 */
02480 void burn_read_opts_set_hardware_error_recovery(struct burn_read_opts *opts,
02481                         int hardware_error_recovery);
02482 
02483 /** Sets whether to report recovered errors or not
02484     @param opts The read opts to change
02485     @param report_recovered_errors If non-zero, recovered errors will be reported.
02486 */
02487 void burn_read_opts_report_recovered_errors(struct burn_read_opts *opts,
02488                         int report_recovered_errors);
02489 
02490 /** Sets whether blocks with unrecoverable errors should be read or not
02491     @param opts The read opts to change
02492     @param transfer_damaged_blocks If non-zero, blocks with unrecoverable errors will still be read.
02493 */
02494 void burn_read_opts_transfer_damaged_blocks(struct burn_read_opts *opts,
02495                         int transfer_damaged_blocks);
02496 
02497 /** Sets the number of retries to attempt when trying to correct an error
02498     @param opts The read opts to change
02499     @param hardware_error_retries The number of retries to attempt when correcting an error.
02500 */
02501 void burn_read_opts_set_hardware_error_retries(struct burn_read_opts *opts,
02502                            unsigned char hardware_error_retries);
02503 
02504 
02505 /* ts A90815 */
02506 /** Gets the list of profile codes supported by the drive.
02507     Profiles depict the feature sets which constitute media types. For
02508     known profile codes and names see burn_disc_get_profile().
02509     @param d            is the drive to query
02510     @param num_profiles returns the number of supported profiles
02511     @param profiles     returns the profile codes
02512     @param is_current   returns the status of the corresponding profile code:
02513                         1= current, i.e. the matching media is loaded
02514                         0= not current, i.e. the matching media is not loaded
02515     @return  always 1 for now
02516     @since 0.7.0
02517 */
02518 int burn_drive_get_all_profiles(struct burn_drive *d, int *num_profiles,
02519                                 int profiles[64], char is_current[64]);
02520 
02521 
02522 /* ts A90815 */
02523 /** Obtains the profile name associated with a profile code.
02524     @param profile_code the profile code to be translated
02525     @param name         returns the profile name (e.g. "DVD+RW")  
02526     @return             1= known profile code , 0= unknown profile code
02527     @since 0.7.0
02528 */
02529 int burn_obtain_profile_name(int profile_code, char name[80]);
02530 
02531 
02532 /** Gets the maximum write speed for a drive and eventually loaded media.
02533     The return value might change by the media type of already loaded media,
02534     again by call burn_drive_grab() and again by call burn_disc_read_atip(). 
02535     @param d Drive to query
02536     @return Maximum write speed in K/s
02537 */
02538 int burn_drive_get_write_speed(struct burn_drive *d);
02539 
02540 
02541 /* ts A61021 */
02542 /** Gets the minimum write speed for a drive and eventually loaded media.
02543     The return value might change by the media type of already loaded media, 
02544     again by call burn_drive_grab() and again by call burn_disc_read_atip().
02545     @param d Drive to query
02546     @return Minimum write speed in K/s
02547     @since 0.2.6
02548 */
02549 int burn_drive_get_min_write_speed(struct burn_drive *d);
02550 
02551 
02552 /** Gets the maximum read speed for a drive
02553     @param d Drive to query
02554     @return Maximum read speed in K/s
02555 */
02556 int burn_drive_get_read_speed(struct burn_drive *d);
02557 
02558 
02559 /* ts A61226 */
02560 /** Obtain a copy of the current speed descriptor list. The drive's list gets
02561     updated on various occasions such as burn_drive_grab() but the copy
02562     obtained here stays untouched. It has to be disposed via
02563     burn_drive_free_speedlist() when it is not longer needed. Speeds
02564     may appear several times in the list. The list content depends much on
02565     drive and media type. It seems that .source == 1 applies mostly to CD media
02566     whereas .source == 2 applies to any media.
02567     @param d Drive to query
02568     @param speed_list The copy. If empty, *speed_list gets returned as NULL.
02569     @return 1=success , 0=list empty , <0 severe error
02570     @since 0.3.0
02571 */
02572 int burn_drive_get_speedlist(struct burn_drive *d,
02573                              struct burn_speed_descriptor **speed_list);
02574 
02575 /* ts A70713 */
02576 /** Look up the fastest speed descriptor which is not faster than the given
02577     speed_goal. If it is 0, then the fastest one is chosen among the
02578     descriptors with the highest end_lba. If it is -1 then the slowest speed
02579     descriptor is chosen regardless of end_lba. Parameter flag decides whether
02580     the speed goal means write speed or read speed.
02581     @param d Drive to query
02582     @param speed_goal Upper limit for speed,
02583                       0=search for maximum speed , -1 search for minimum speed
02584     @param best_descr Result of the search, NULL if no match
02585     @param flag Bitfield for control purposes
02586                 bit0= look for best read speed rather than write speed
02587                 bit1= look for any source type (else look for source==2 first
02588                   and for any other source type only with CD media)
02589     @return >0 indicates a valid best_descr, 0 = no valid best_descr
02590     @since 0.3.8
02591 */
02592 int burn_drive_get_best_speed(struct burn_drive *d, int speed_goal,
02593                         struct burn_speed_descriptor **best_descr, int flag);
02594 
02595 
02596 /* ts A61226 */
02597 /** Dispose a speed descriptor list copy which was obtained by
02598     burn_drive_get_speedlist().
02599     @param speed_list The list copy. *speed_list gets set to NULL.
02600     @return 1=list disposed , 0= *speedlist was already NULL
02601     @since 0.3.0
02602 */
02603 int burn_drive_free_speedlist(struct burn_speed_descriptor **speed_list);
02604 
02605 
02606 /* ts A70203 */
02607 /* @since 0.3.2 */
02608 /** The reply structure for burn_disc_get_multi_caps()
02609 */
02610 struct burn_multi_caps {
02611 
02612     /* Multi-session capability allows to keep the media appendable after
02613        writing a session. It also guarantees that the drive will be able
02614        to predict and use the appropriate Next Writeable Address to place
02615        the next session on the media without overwriting the existing ones.
02616        It does not guarantee that the selected write type is able to do
02617        an appending session after the next session. (E.g. CD SAO is capable
02618        of multi-session by keeping a disc appendable. But .might_do_sao
02619        will be 0 afterwards, when checking the appendable media.)
02620         1= media may be kept appendable by burn_write_opts_set_multi(o,1)
02621         0= media will not be appendable
02622     */
02623     int multi_session;
02624 
02625     /* Multi-track capability allows to write more than one track source
02626        during a single session. The written tracks can later be found in
02627        libburn's TOC model with their start addresses and sizes.
02628         1= multiple tracks per session are allowed
02629         0= only one track per session allowed
02630     */
02631     int multi_track;
02632 
02633     /* Start-address capability allows to set a non-zero address with
02634        burn_write_opts_set_start_byte(). Eventually this has to respect
02635        .start_alignment and .start_range_low, .start_range_high in this
02636        structure.
02637         1= non-zero start address is allowed
02638             0= only start address 0 is allowed (to depict the drive's own idea
02639                about the appropriate write start)
02640     */
02641     int start_adr;
02642 
02643     /** The alignment for start addresses.
02644         ( start_address % start_alignment ) must be 0.
02645     */
02646     off_t start_alignment;
02647 
02648     /** The lowest permissible start address.
02649     */
02650     off_t start_range_low;
02651 
02652     /** The highest addressable start address.
02653     */
02654     off_t start_range_high;
02655 
02656     /** Potential availability of write modes
02657          4= needs no size prediction, not to be chosen automatically
02658          3= needs size prediction, not to be chosen automatically
02659          2= available, no size prediction necessary
02660          1= available, needs exact size prediction
02661          0= not available
02662         With CD media (profiles 0x09 and 0x0a) check also the elements
02663         *_block_types of the according write mode.
02664     */
02665     int might_do_tao;
02666     int might_do_sao;
02667     int might_do_raw;
02668 
02669     /** Generally advised write mode.
02670         Not necessarily the one chosen by burn_write_opts_auto_write_type()
02671         because the burn_disc structure might impose particular demands.
02672     */
02673     enum burn_write_types advised_write_mode;
02674 
02675     /** Write mode as given by parameter wt of burn_disc_get_multi_caps().
02676     */
02677     enum burn_write_types selected_write_mode;
02678 
02679     /** Profile number which was current when the reply was generated */
02680     int current_profile;
02681 
02682     /** Wether the current profile indicates CD media. 1=yes, 0=no */
02683     int current_is_cd_profile;
02684 
02685         /* ts A70528 */
02686         /* @since 0.3.8 */
02687     /** Wether the current profile is able to perform simulated write */
02688     int might_simulate;
02689 };
02690 
02691 /** Allocates a struct burn_multi_caps (see above) and fills it with values
02692     which are appropriate for the drive and the loaded media. The drive
02693     must be grabbed for this call. The returned structure has to be disposed
02694     via burn_disc_free_multi_caps() when no longer needed.
02695     @param d The drive to inquire
02696     @param wt With BURN_WRITE_NONE the best capabilities of all write modes
02697               get returned. If set to a write mode like BURN_WRITE_SAO the
02698               capabilities with that particular mode are returned and the
02699               return value is 0 if the desired mode is not possible.
02700     @param caps returns the info structure
02701     @param flag Bitfield for control purposes (unused yet, submit 0)
02702     @return < 0 : error , 0 : writing seems impossible , 1 : writing possible 
02703     @since 0.3.2
02704 */
02705 int burn_disc_get_multi_caps(struct burn_drive *d, enum burn_write_types wt,
02706              struct burn_multi_caps **caps, int flag);
02707 
02708 /** Removes from memory a multi session info structure which was returned by
02709     burn_disc_get_multi_caps(). The pointer *caps gets set to NULL.
02710     @param caps the info structure to dispose (note: pointer to pointer)
02711     @return 0 : *caps was already NULL, 1 : memory object was disposed
02712     @since 0.3.2
02713 */
02714 int burn_disc_free_multi_caps(struct burn_multi_caps **caps);
02715 
02716 
02717 /** Gets a copy of the toc_entry structure associated with a track
02718     @param t Track to get the entry from
02719     @param entry Struct for the library to fill out
02720 */
02721 void burn_track_get_entry(struct burn_track *t, struct burn_toc_entry *entry);
02722 
02723 /** Gets a copy of the toc_entry structure associated with a session's lead out
02724     @param s Session to get the entry from
02725     @param entry Struct for the library to fill out
02726 */
02727 void burn_session_get_leadout_entry(struct burn_session *s,
02728                                     struct burn_toc_entry *entry);
02729 
02730 /** Gets an array of all the sessions for the disc
02731     THIS IS NO LONGER VALID AFTER YOU ADD OR REMOVE A SESSION
02732     @param d Disc to get session array for
02733     @param num Returns the number of sessions in the array
02734     @return array of sessions
02735 */
02736 struct burn_session **burn_disc_get_sessions(struct burn_disc *d,
02737                                              int *num);
02738 
02739 int burn_disc_get_sectors(struct burn_disc *d);
02740 
02741 /** Gets an array of all the tracks for a session
02742     THIS IS NO LONGER VALID AFTER YOU ADD OR REMOVE A TRACK
02743     @param s session to get track array for
02744     @param num Returns the number of tracks in the array
02745     @return array of tracks
02746 */
02747 struct burn_track **burn_session_get_tracks(struct burn_session *s,
02748                                             int *num);
02749 
02750 int burn_session_get_sectors(struct burn_session *s);
02751 
02752 /** Gets the mode of a track
02753     @param track the track to query
02754     @return the track's mode
02755 */
02756 int burn_track_get_mode(struct burn_track *track);
02757 
02758 /** Returns whether the first track of a session is hidden in the pregap
02759     @param session the session to query
02760     @return non-zero means the first track is hidden
02761 */
02762 int burn_session_get_hidefirst(struct burn_session *session);
02763 
02764 /** Returns the library's version in its parts.
02765     This is the runtime counterpart of the three build time macros 
02766     burn_header_version_* below.
02767     @param major The major version number
02768     @param minor The minor version number
02769     @param micro The micro version number
02770 */
02771 void burn_version(int *major, int *minor, int *micro);
02772 
02773 
02774 /* ts A80129 */
02775 /* @since 0.4.4 */
02776 /** These three release version numbers tell the revision of this header file
02777     and of the API it describes. They are memorized by applications at build
02778     time.
02779     Immediately after burn_initialize() an application should do this check:
02780       burn_version(&major, &minor, &micro);
02781       if(major > burn_header_version_major
02782          || (major == burn_header_version_major
02783              && (minor > burn_header_version_minor
02784                  || (minor == burn_header_version_minor
02785                      && micro >= burn_header_version_micro)))) {
02786           ... Young enough. Go on with program run ....
02787       } else {
02788           ... Too old. Do not use this libburn version ...
02789       }
02790 
02791 */
02792 #define burn_header_version_major  1
02793 #define burn_header_version_minor  1
02794 #define burn_header_version_micro  4
02795 /** Note:
02796     Above version numbers are also recorded in configure.ac because libtool
02797     wants them as parameters at build time.
02798     For the library compatibility check, BURN_*_VERSION in configure.ac
02799     are not decisive. Only the three numbers above do matter.
02800 */
02801 /** Usage discussion:
02802 
02803 Some developers of the libburnia project have differing
02804 opinions how to ensure the compatibility of libaries
02805 and applications.
02806 
02807 It is about whether to use at compile time and at runtime
02808 the version numbers isoburn_header_version_* provided here.
02809 Thomas Schmitt advises to use them.
02810 Vreixo Formoso advises to use other means.
02811 
02812 At compile time:
02813 
02814 Vreixo Formoso advises to leave proper version matching
02815 to properly programmed checks in the the application's
02816 build system, which will eventually refuse compilation.
02817 
02818 Thomas Schmitt advises to use the macros defined here
02819 for comparison with the application's requirements of
02820 library revisions and to eventually break compilation.
02821 
02822 Both advises are combinable. I.e. be master of your
02823 build system and have #if checks in the source code
02824 of your application, nevertheless.
02825 
02826 At runtime (via *_is_compatible()):
02827 
02828 Vreixo Formoso advises to compare the application's
02829 requirements of library revisions with the runtime
02830 library. This is to allow runtime libraries which are
02831 young enough for the application but too old for
02832 the lib*.h files seen at compile time.
02833 
02834 Thomas Schmitt advises to compare the header
02835 revisions defined here with the runtime library.
02836 This is to enforce a strictly monotonous chain
02837 of revisions from app to header to library,
02838 at the cost of excluding some older libraries.
02839 
02840 These two advises are mutually exclusive.
02841 
02842 */
02843 
02844 /* ts A91226 */
02845 /** Obtain the id string of the SCSI transport interface.
02846     This interface may be a system specific adapter module of libburn or
02847     an adapter to a supporting library like libcdio.
02848     @param flag  Bitfield for control puposes, submit 0 for now
02849     @return      A pointer to the id string. Do not alter the string content.
02850     @since 0.7.6
02851 */
02852 char *burn_scsi_transport_id(int flag);
02853 
02854 /* ts A60924 : ticket 74 */
02855 /** Control queueing and stderr printing of messages from libburn.
02856     Severity may be one of "NEVER", "ABORT", "FATAL", "FAILURE", "SORRY",
02857     "WARNING", "HINT", "NOTE", "UPDATE", "DEBUG", "ALL".
02858     @param queue_severity Gives the minimum limit for messages to be queued.
02859                           Default: "NEVER". If you queue messages then you
02860                           must consume them by burn_msgs_obtain().
02861     @param print_severity Does the same for messages to be printed directly
02862                           to stderr. Default: "FATAL".
02863     @param print_id       A text prefix to be printed before the message.
02864     @return               >0 for success, <=0 for error
02865     @since 0.2.6
02866 */
02867 int burn_msgs_set_severities(char *queue_severity,
02868                              char *print_severity, char *print_id);
02869 
02870 /* ts A60924 : ticket 74 */
02871 /*  @since 0.2.6 */
02872 #define BURN_MSGS_MESSAGE_LEN 4096
02873 
02874 /** Obtain the oldest pending libburn message from the queue which has at
02875     least the given minimum_severity. This message and any older message of
02876     lower severity will get discarded from the queue and is then lost forever.
02877     @param minimum_severity  may be one of "NEVER", "ABORT", "FATAL",
02878                       "FAILURE", "SORRY", "WARNING", "HINT", "NOTE", "UPDATE",
02879                       "DEBUG", "ALL".
02880                       To call with minimum_severity "NEVER" will discard the
02881                       whole queue.
02882     @param error_code Will become a unique error code as listed in
02883                       libburn/libdax_msgs.h
02884     @param msg_text   Must provide at least BURN_MSGS_MESSAGE_LEN bytes.
02885     @param os_errno   Will become the eventual errno related to the message
02886     @param severity   Will become the severity related to the message and
02887                       should provide at least 80 bytes.
02888     @return 1 if a matching item was found, 0 if not, <0 for severe errors
02889     @since 0.2.6
02890 */
02891 int burn_msgs_obtain(char *minimum_severity,
02892                      int *error_code, char msg_text[], int *os_errno,
02893                      char severity[]);
02894 
02895 
02896 /* ts A70922 */
02897 /** Submit a message to the libburn queueing system. It will be queued or
02898     printed as if it was generated by libburn itself.
02899     @param error_code The unique error code of your message.
02900                       Submit 0 if you do not have reserved error codes within
02901                       the libburnia project.
02902     @param msg_text   Not more than BURN_MSGS_MESSAGE_LEN characters of
02903                       message text.
02904     @param os_errno   Eventual errno related to the message. Submit 0 if
02905                       the message is not related to a operating system error.
02906     @param severity   One of "ABORT", "FATAL", "FAILURE", "SORRY", "WARNING",
02907                       "HINT", "NOTE", "UPDATE", "DEBUG". Defaults to "FATAL".
02908     @param d          An eventual drive to which the message shall be related.
02909                       Submit NULL if the message is not specific to a
02910                       particular drive object.
02911     @return           1 if message was delivered, <=0 if failure
02912     @since 0.4.0
02913 */
02914 int burn_msgs_submit(int error_code, char msg_text[], int os_errno,
02915                      char severity[], struct burn_drive *d);
02916 
02917 
02918 /* ts A71016 */
02919 /** Convert a severity name into a severity number, which gives the severity
02920     rank of the name.
02921     @param severity_name A name as with burn_msgs_submit(), e.g. "SORRY".
02922     @param severity_number The rank number: the higher, the more severe.
02923     @param flag Bitfield for control purposes (unused yet, submit 0)
02924     @return >0 success, <=0 failure
02925     @since 0.4.0
02926 */
02927 int burn_text_to_sev(char *severity_name, int *severity_number, int flag);
02928 
02929 
02930 /* ts A80202 */
02931 /** Convert a severity number into a severity name
02932     @since 0.4.4
02933     @param severity_number The rank number: the higher, the more severe.
02934     @param severity_name A name as with burn_msgs_submit(), e.g. "SORRY".
02935     @param flag Bitfield for control purposes (unused yet, submit 0)
02936     @since 0.4.4
02937 */
02938 int burn_sev_to_text(int severity_number, char **severity_name, int flag);
02939 
02940 
02941 
02942 /* ts A70915 */
02943 /** Replace the messenger object handle of libburn by a compatible handle
02944     obtained from a related library. 
02945     See also: libisofs, API function iso_get_messenger().
02946     @param messenger The foreign but compatible message handle.
02947     @return 1 : success, <=0 : failure
02948     @since 0.4.0
02949 */
02950 int burn_set_messenger(void *messenger);
02951 
02952 
02953 /* ts A61002 */
02954 /* @since 0.2.6 */
02955 /** The prototype of a handler function suitable for burn_set_signal_handling()
02956     Such a function has to return -2 if it does not want the process to
02957     exit with value 1.
02958 */
02959 typedef int (*burn_abort_handler_t)(void *handle, int signum, int flag);
02960 
02961 /** Control built-in signal handling. Either by setting an own handler or
02962     by activating the built-in signal handler.
02963 
02964     A function parameter handle of NULL activates the built-in abort handler. 
02965     Depending on mode it may cancel all drive operations, wait for all drives
02966     to become idle, exit(1). It may also prepare function
02967     burn_drive_get_status() for waiting and performing exit(1). 
02968     If parameter handle may be NULL or a text that shall be used as prefix for
02969     pacifier messages of burn_abort_pacifier(). Other than with an application
02970     provided handler, the prefix char array does not have to be kept existing
02971     until the eventual signal event.
02972     Before version 0.7.8 only action 0 was available. I.e. the built-in handler
02973     waited for the drives to become idle and then performed exit(1) directly.
02974     But during burn_disc_write() onto real CD or DVD, FreeBSD 8.0 pauses the
02975     other threads until the signal handler returns.
02976     The new actions try to avoid this deadlock. It is advised to use action 3
02977     at least during burn_disc_write(), burn_disc_erase(), burn_disc_format():
02978       burn_set_signal_handling(text, NULL, 0x30);
02979     and to call burn_is_aborting(0) when the drive is BURN_DRIVE_IDLE.
02980     If burn_is_aborting(0) returns 1, then call burn_abort() and exit(1).
02981 
02982     @param handle Opaque handle eventually pointing to an application
02983                   provided memory object
02984     @param handler A function to be called on signals. It will get handle as
02985                   argument. flag will be 0.
02986                   It should finally call burn_abort(). See there.
02987     @param mode : bit0 - bit3:
02988                     Receiving signals:
02989                     0 Call handler(handle, signum, 0) on nearly all signals
02990                     1 Enable system default reaction on all signals
02991                     2 Try to ignore nearly all signals
02992                    10 like mode 2 but handle SIGABRT like with mode 0
02993                   bit4 - bit7: With handler == NULL :
02994                     Action of built-in handler. "control thread" is the one
02995                     which called burn_set_signal_handling().
02996                     All actions activate receive mode 2 to ignore further
02997                     signals.
02998                     0 Same as 1 (for pre-0.7.8 backward compatibility)
02999                     @since 0.7.8
03000                     1 Catch the control thread in abort handler, call
03001                       burn_abort(>0) and finally exit(1).
03002                       Does not always work with FreeBSD.
03003                     2 Call burn_abort(-1) and return from handler. When the
03004                       control thread calls burn_drive_get_status(), then do
03005                       burn_abort(>0) instead, and finally exit(1).
03006                       Does not always work with FreeBSD.
03007                     3 Call burn_abort(-1), return from handler. It is duty of
03008                       the application to detect a pending abort condition
03009                       by calling burn_is_aborting() and to wait for all
03010                       drives to become idle. E.g. by calling burn_abort(>0).
03011                     4 Like 3, but without calling burn_abort(-1). Only the
03012                       indicator of burn_is_aborting() gets set.
03013     @since 0.2.6
03014 */
03015 void burn_set_signal_handling(void *handle, burn_abort_handler_t handler, 
03016                  int mode);
03017 
03018 
03019 /* ts B00304 */
03020 /* Inquire whether the built-in abort handler was triggered by a signal.
03021    This has to be done to detect pending abort handling if signal handling
03022    was set to the built-in handler and action was set to 2 or 3.
03023    @param flag  Bitfield for control purposes (unused yet, submit 0)
03024    @return    0 = no abort was triggered
03025              >0 = action that was triggered (action 0 is reported as 1)
03026    @since 0.7.8
03027 */
03028 int burn_is_aborting(int flag);
03029 
03030 
03031 /* ts A70811 */
03032 /** Write data in random access mode.
03033     The drive must be grabbed successfully before calling this function which
03034     circumvents usual libburn session processing and rather writes data without
03035     preparations or finalizing. This will work only with overwriteable media
03036     which are also suitable for burn_write_opts_set_start_byte(). The same
03037     address alignment restrictions as with this function apply. I.e. for DVD
03038     it is best to align to 32 KiB blocks (= 16 LBA units). The amount of data
03039     to be written is subject to the same media dependent alignment rules.
03040     Again, 32 KiB is most safe.
03041     Call burn_disc_get_multi_caps() can obtain the necessary media info. See
03042     resulting struct burn_multi_caps elements .start_adr , .start_alignment ,
03043     .start_range_low , .start_range_high .
03044     Other than burn_disc_write() this is a synchronous call which returns
03045     only after the write transaction has ended (sucessfully or not). So it is
03046     wise not to transfer giant amounts of data in a single call.
03047     Important: Data have to fit into the already formatted area of the media.
03048     @param d            The drive to which to write 
03049     @param byte_address The start address of the write in byte
03050                         (1 LBA unit = 2048 bytes) (do respect media alignment)
03051     @param data         The bytes to be written
03052     @param data_count   The number of those bytes (do respect media alignment)
03053                         data_count == 0 is permitted (e.g. to flush the
03054                         drive buffer without further data transfer).
03055     @param flag         Bitfield for control purposes:
03056                         bit0 = flush the drive buffer after eventual writing
03057     @return 1=sucessful , <=0 : number of transfered bytes * -1
03058     @since 0.4.0
03059 */
03060 int burn_random_access_write(struct burn_drive *d, off_t byte_address,
03061                              char *data, off_t data_count, int flag);
03062 
03063 
03064 /* ts A81215 */
03065 /** Inquire the maximum amount of readable data.
03066     It is supposed that all LBAs in the range from 0 to media_read_acpacity-1
03067     can be read via burn_read_data() although some of them may never have been
03068     recorded. If tracks are recognizable then it is better to only read
03069     LBAs which are part of some track.
03070     @param d            The drive from which to read
03071     @param capacity     Will return the result if valid
03072     @param flag         Bitfield for control purposes: Unused yet, submit 0.
03073     @return 1=sucessful , <=0 an error occured
03074     @since 0.6.0
03075 */
03076 int burn_get_read_capacity(struct burn_drive *d, int *capacity, int flag);
03077 
03078 
03079 /* ts A70812 */
03080 /** Read data in random access mode.
03081     The drive must be grabbed successfully before calling this function.
03082     With all currently supported drives and media the byte_address has to
03083     be aligned to 2048 bytes. Only data tracks with 2048 bytes per sector
03084     can be read this way. I.e. not CD-audio, not CD-video-stream ...
03085     This is a synchronous call which returns only after the full read job
03086     has ended (sucessfully or not). So it is wise not to read giant amounts
03087     of data in a single call.
03088     @param d            The drive from which to read
03089     @param byte_address The start address of the read in byte (aligned to 2048)
03090     @param data         A memory buffer capable of taking data_size bytes
03091     @param data_size    The amount of data to be read. This does not have to
03092                         be aligned to any block size.
03093     @param data_count   The amount of data actually read (interesting on error)
03094     @param flag         Bitfield for control purposes:
03095                         bit0= - reserved -
03096                         bit1= do not submit error message if read error
03097                         bit2= on error do not try to read a second time
03098                               with single block steps.
03099                               @since 0.5.2 
03100                         bit3= return -2 on permission denied error rather than
03101                               issueing a warning message.
03102                               @since 1.0.6
03103     @return 1=sucessful , <=0 an error occured
03104                           with bit3:  -2= permission denied error
03105     @since 0.4.0
03106 */
03107 int burn_read_data(struct burn_drive *d, off_t byte_address,
03108                    char data[], off_t data_size, off_t *data_count, int flag);
03109 
03110 
03111 /* ts A70904 */
03112 /** Inquire whether the drive object is a real MMC drive or a pseudo-drive
03113     created by a stdio: address.
03114     @param d      The drive to inquire
03115     @return       0= null-drive
03116                   1= real MMC drive
03117                   2= stdio-drive, random access, read-write
03118                   3= stdio-drive, sequential, write-only
03119                   4= stdio-drive, random access, read-only
03120                      (only if enabled by burn_allow_drive_role_4())
03121                   5= stdio-drive, random access, write-only
03122                      (only if enabled by burn_allow_drive_role_4())
03123     @since 0.4.0
03124 */
03125 int burn_drive_get_drive_role(struct burn_drive *d);
03126 
03127 
03128 /* ts B10312 */
03129 /** Allow drive role 4 "random access read-only"
03130     and drive role 5 "random access write-only".
03131     By default a random access file assumes drive role 2 "read-write"
03132     regardless whether it is actually readable or writeable.
03133     If enabled, random-access file objects which recognizably allow no
03134     writing will be classified as role 4 and those which allow no reading
03135     will get role 5.
03136     Candidates are drive addresses of the form stdio:/dev/fd/# , where # is
03137     the integer number of an open file descriptor. If this descriptor was
03138     opened read-only resp. write-only, then it gets role 4 resp. role 5.
03139     Other paths may get tested by an attempt to open them for read-write
03140     (role 2) resp. read-only (role 4) resp. write-only (role 5). See bit1.
03141     @param allowed      Bitfield for control purposes:
03142                         bit0= Enable roles 4 and 5 for drives which get
03143                               aquired after this call
03144                         bit1= with bit0:
03145                               Test whether the file can be opened for
03146                               read-write resp. read-only resp. write-only.
03147                               Classify as roles 2 resp. 4 resp. 5.
03148                         bit2= with bit0 and bit1:
03149                               Classify files which cannot be opened at all
03150                               as role 0 : useless dummy.
03151                               Else classify as role 2.
03152                         bit3= Classify non-empty role 5 drives as
03153                               BURN_DISC_APPENDABLE with Next Writeable Address
03154                               after the end of the file. It is nevertheless
03155                               possible to change this address by call
03156                               burn_write_opts_set_start_byte().
03157     @since 1.0.6
03158 */
03159 void burn_allow_drive_role_4(int allowed);
03160 
03161 
03162 /* ts A70923 */
03163 /** Find out whether a given address string would lead to the given drive
03164     object. This should be done in advance for track source addresses
03165     with parameter drive_role set to 2. 
03166     Although a real MMC drive should hardly exist as two drive objects at
03167     the same time, this can easily happen with stdio-drives. So if more than
03168     one drive is used by the application, then this gesture is advised:
03169       burn_drive_d_get_adr(d2, adr2);
03170       if (burn_drive_equals_adr(d1, adr2, burn_drive_get_drive_role(d2)))
03171         ... Both drive objects point to the same storage facility ...
03172  
03173     @param d1      Existing drive object
03174     @param adr2    Address string to be tested. Prefix "stdio:" overrides
03175                    parameter drive_role2 by either 0 or 2 as appropriate.
03176                    The string must be shorter than BURN_DRIVE_ADR_LEN.
03177     @param drive_role2  Role as burn_drive_get_drive_role() would attribute
03178                    to adr2 if it was a drive. Use value 2 for checking track
03179                    sources resp. pseudo-drive addresses without "stdio:".
03180                    Use 1 for checking drive addresses including those with
03181                    prefix "stdio:".
03182     @return        1= adr2 leads to d1 , 0= adr2 seems not to lead to d1,
03183                    -1 = adr2 is bad
03184     @since 0.4.0
03185 */
03186 int burn_drive_equals_adr(struct burn_drive *d1, char *adr2, int drive_role2);
03187 
03188 
03189 
03190 /*
03191   Audio track data extraction facility.
03192 */
03193 
03194 /* Maximum size for address paths and fmt_info strings */
03195 #define LIBDAX_AUDIOXTR_STRLEN 4096
03196 
03197 
03198 /** Extractor object encapsulating intermediate states of extraction.
03199     The clients of libdax_audioxtr shall only allocate pointers to this
03200     struct and get a storage object via libdax_audioxtr_new().
03201     Appropriate initial value for the pointer is NULL.
03202 */
03203 struct libdax_audioxtr;
03204 
03205 
03206 /** Open an audio file, check wether suitable, create extractor object.
03207     @param xtr Opaque handle to extractor. Gets attached extractor object.
03208     @param path Address of the audio file to extract. "-" is stdin (but might
03209                 be not suitable for all futurely supported formats).
03210     @param flag Bitfield for control purposes (unused yet, submit 0)
03211     @return >0 success
03212              0 unsuitable format
03213             -1 severe error
03214             -2 path not found
03215     @since 0.2.4
03216 */
03217 int libdax_audioxtr_new(struct libdax_audioxtr **xtr, char *path, int flag);
03218 
03219 
03220 /** Obtain identification parameters of opened audio source.
03221     @param xtr Opaque handle to extractor
03222     @param fmt Gets pointed to the audio file format id text: ".wav" , ".au"
03223     @param fmt_info Gets pointed to a format info text telling parameters
03224     @param num_channels     e.g. 1=mono, 2=stereo, etc
03225     @param sample_rate      e.g. 11025, 44100
03226     @param bits_per_sample  e.g. 8= 8 bits per sample, 16= 16 bits ...
03227     @param msb_first Byte order of samples: 0=Intel 1=Motorola
03228     @param flag Bitfield for control purposes (unused yet, submit 0)
03229     @return >0 success, <=0 failure
03230     @since 0.2.4
03231 */
03232 int libdax_audioxtr_get_id(struct libdax_audioxtr *xtr,
03233                            char **fmt, char **fmt_info,
03234                            int *num_channels, int *sample_rate,
03235                            int *bits_per_sample, int *msb_first, int flag);
03236 
03237 
03238 /** Obtain a prediction about the extracted size based on internal information
03239     of the formatted file.
03240     @param xtr Opaque handle to extractor
03241     @param size Gets filled with the predicted size
03242     @param flag Bitfield for control purposes (unused yet, submit 0)
03243     @return 1 prediction was possible , 0 no prediction could be made
03244     @since 0.2.4
03245 */
03246 int libdax_audioxtr_get_size(struct libdax_audioxtr *o, off_t *size, int flag);
03247 
03248 
03249 /** Obtain next buffer full of extracted data in desired format (only raw audio
03250     for now).
03251     @param xtr Opaque handle to extractor
03252     @param buffer Gets filled with extracted data
03253     @param buffer_size Maximum number of bytes to be filled into buffer
03254     @param flag Bitfield for control purposes
03255                 bit0= do not stop at predicted end of data
03256     @return >0 number of valid buffer bytes,
03257              0 End of file
03258             -1 operating system reports error
03259             -2 usage error by application
03260     @since 0.2.4
03261 */
03262 int libdax_audioxtr_read(struct libdax_audioxtr *xtr,
03263                          char buffer[], int buffer_size, int flag);
03264 
03265 
03266 /** Try to obtain a file descriptor which will deliver extracted data
03267     to normal calls of read(2). This may fail because the format is
03268     unsuitable for that, but ".wav" is ok. If this call succeeds the xtr
03269     object will have forgotten its file descriptor and libdax_audioxtr_read()
03270     will return a usage error. One may use *fd after libdax_audioxtr_destroy()
03271     and will have to close it via close(2) when done with it.
03272     @param xtr Opaque handle to extractor
03273     @param fd Eventually returns the file descriptor number
03274     @param flag Bitfield for control purposes
03275                 bit0= do not dup(2) and close(2) but hand out original fd
03276     @return 1 success, 0 cannot hand out fd , -1 severe error
03277     @since 0.2.4
03278 */
03279 int libdax_audioxtr_detach_fd(struct libdax_audioxtr *o, int *fd, int flag);
03280 
03281 
03282 /** Clean up after extraction and destroy extractor object.
03283     @param xtr Opaque handle to extractor, *xtr is allowed to be NULL,
03284                *xtr is set to NULL by this function
03285     @param flag Bitfield for control purposes (unused yet, submit 0)
03286     @return 1 = destroyed object, 0 = was already destroyed
03287     @since 0.2.4
03288 */
03289 int libdax_audioxtr_destroy(struct libdax_audioxtr **xtr, int flag);
03290 
03291 
03292 
03293 #ifndef DOXYGEN
03294 
03295 BURN_END_DECLS
03296 
03297 #endif
03298 
03299 
03300 /* ts A91205 */
03301 /* The following experiments may be interesting in future:
03302 */
03303 
03304 /* Perform OPC explicitely.
03305    # define Libburn_pioneer_dvr_216d_with_opC 1
03306 */
03307 
03308 /* Load mode page 5 and modify it rather than composing from scratch.
03309    # define Libburn_pioneer_dvr_216d_load_mode5 1
03310 */
03311 
03312 /* Inquire drive events and react by reading configuration or starting unit.
03313    # define Libburn_pioneer_dvr_216d_get_evenT 1
03314 */
03315 
03316 /* ts A91112 */
03317 /* Do not probe CD modes but declare only data and audio modes supported.
03318    For other modes resp. real probing one has to call
03319    burn_drive_probe_cd_write_modes().
03320 
03321 */
03322 #define Libburn_dummy_probe_write_modeS 1
03323 
03324 
03325 #endif /*LIBBURN_H*/