ccRTP
Classes | Public Member Functions | Protected Member Functions | Protected Attributes
OutgoingDataQueue Class Reference

A generic outgoing RTP data queue supporting multiple destinations. More...

#include <oqueue.h>

Inheritance diagram for OutgoingDataQueue:
OutgoingDataQueueBase DestinationListHandler RTPQueueBase RTPDataQueue QueueRTCPManager RTPDuplex AVPQueue

List of all members.

Classes

struct  OutgoingRTPPktLink

Public Member Functions

bool addDestination (const InetHostAddress &ia, tpport_t dataPort=DefaultRTPDataPort, tpport_t controlPort=0)
bool addDestination (const InetMcastAddress &ia, tpport_t dataPort=DefaultRTPDataPort, tpport_t controlPort=0)
bool forgetDestination (const InetHostAddress &ia, tpport_t dataPort=DefaultRTPDataPort, tpport_t controlPort=0)
bool forgetDestination (const InetMcastAddress &ia, tpport_t dataPort=DefaultRTPDataPort, tpport_t controlPort=0)
void addContributor (uint32 csrc)
 Add csrc as the CSRC identifier of a new contributor.
bool removeContributor (uint32 csrc)
 Remove CSRC from the list of contributors.
bool isSending () const
 Determine if outgoing packets are waiting to send.
void putData (uint32 stamp, const unsigned char *data=NULL, size_t len=0)
 This is used to create a data packet in the send queue.
void sendImmediate (uint32 stamp, const unsigned char *data=NULL, size_t len=0)
 This is used to create a data packet and send it immediately.
void setPadding (uint8 paddinglen)
 Set padding.
void setMark (bool mark)
 Set marker bit for the packet in which the next data provided will be send.
bool getMark () const
 Get wheter the mark bit will be set in the next packet.
size_t setPartial (uint32 timestamp, unsigned char *data, size_t offset, size_t max)
 Set partial data for an already queued packet.
microtimeout_t getDefaultSchedulingTimeout () const
void setSchedulingTimeout (microtimeout_t to)
 Set the default scheduling timeout to use when no data packets are waiting to be sent.
microtimeout_t getDefaultExpireTimeout () const
void setExpireTimeout (microtimeout_t to)
 Set the "expired" timer for expiring packets pending in the send queue which have gone unsent and are already "too late" to be sent now.
microtimeout_t getExpireTimeout () const
uint32 getSendPacketCount () const
 Get the total number of packets sent so far.
uint32 getSendOctetCount () const
 Get the total number of octets (payload only) sent so far.
uint16 getSequenceNumber () const
 Get the sequence number of the next outgoing packet.
void setOutQueueCryptoContext (CryptoContext *cc)
 Set ouput queue CryptoContext.
void removeOutQueueCryptoContext (CryptoContext *cc)
 Remove output queue CryptoContext.
CryptoContextgetOutQueueCryptoContext (uint32 ssrc)
 Get an output queue CryptoContext identified by SSRC.

Protected Member Functions

 OutgoingDataQueue ()
virtual ~OutgoingDataQueue ()
void dispatchImmediate (OutgoingRTPPkt *packet)
 This is used to write the RTP data packet to one or more destinations.
microtimeout_t getSchedulingTimeout ()
 This computes the timeout period for scheduling transmission of the next packet at the "head" of the send buffer.
size_t dispatchDataPacket ()
 This function is used by the service thread to process the next outgoing packet pending in the sending queue.
void setNextSeqNum (uint32 seqNum)
 For thoses cases in which the application requires a method to set the sequence number for the outgoing stream (such as for implementing the RTSP PLAY command).
uint32 getCurrentSeqNum (void)
void setInitialTimestamp (uint32 ts)
uint32 getInitialTimestamp ()
void purgeOutgoingQueue ()
virtual void setControlPeer (const InetAddress &host, tpport_t port)

Protected Attributes

Mutex cryptoMutex
std::list< CryptoContext * > cryptoContexts

Detailed Description

A generic outgoing RTP data queue supporting multiple destinations.

Author:
Federico Montesino Pouzols <fedemp@altern.org>

Constructor & Destructor Documentation

virtual OutgoingDataQueue::~OutgoingDataQueue ( ) [inline, protected, virtual]

Member Function Documentation

void OutgoingDataQueue::addContributor ( uint32  csrc)

Add csrc as the CSRC identifier of a new contributor.

This method adds the CSRC identifier to a list of contributors that will be inserted in every packet enqueued from now on.

bool OutgoingDataQueue::addDestination ( const InetHostAddress &  ia,
tpport_t  dataPort = DefaultRTPDataPort,
tpport_t  controlPort = 0 
)
bool OutgoingDataQueue::addDestination ( const InetMcastAddress &  ia,
tpport_t  dataPort = DefaultRTPDataPort,
tpport_t  controlPort = 0 
)
size_t OutgoingDataQueue::dispatchDataPacket ( ) [protected]

This function is used by the service thread to process the next outgoing packet pending in the sending queue.

Returns:
number of bytes sent. 0 if silent, <0 if error.
void OutgoingDataQueue::dispatchImmediate ( OutgoingRTPPkt packet) [protected]

This is used to write the RTP data packet to one or more destinations.

It is used by both sendImmediate and by dispatchDataPacket.

Parameters:
RTPpacket to send.
bool OutgoingDataQueue::forgetDestination ( const InetHostAddress &  ia,
tpport_t  dataPort = DefaultRTPDataPort,
tpport_t  controlPort = 0 
)
bool OutgoingDataQueue::forgetDestination ( const InetMcastAddress &  ia,
tpport_t  dataPort = DefaultRTPDataPort,
tpport_t  controlPort = 0 
)
uint32 OutgoingDataQueue::getCurrentSeqNum ( void  ) [inline, protected]
uint32 OutgoingDataQueue::getInitialTimestamp ( ) [inline, protected]
bool OutgoingDataQueue::getMark ( ) const [inline]

Get wheter the mark bit will be set in the next packet.

Get an output queue CryptoContext identified by SSRC.

Parameters:
ssrcRequest CryptoContext for this incoming SSRC
Returns:
Pointer to CryptoContext of the SSRC of NULL if no context available for this SSRC.

This computes the timeout period for scheduling transmission of the next packet at the "head" of the send buffer.

If no packets are waiting, a default timeout is used. This actually forms the "isPending()" timeout of the rtp receiver in the service thread.

Returns:
timeout until next packet is scheduled to send.
uint32 OutgoingDataQueue::getSendOctetCount ( ) const [inline]

Get the total number of octets (payload only) sent so far.

Returns:
total number of payload octets sent in RTP packets.
uint32 OutgoingDataQueue::getSendPacketCount ( ) const [inline]

Get the total number of packets sent so far.

Returns:
total number of packets sent
uint16 OutgoingDataQueue::getSequenceNumber ( ) const [inline]

Get the sequence number of the next outgoing packet.

Returns:
the 16 bit sequence number.

Determine if outgoing packets are waiting to send.

Returns:
true if there are packets waiting to be send.
void OutgoingDataQueue::putData ( uint32  stamp,
const unsigned char *  data = NULL,
size_t  len = 0 
)

This is used to create a data packet in the send queue.

Sometimes a "NULL" or empty packet will be used instead, and these are known as "silent" packets. "Silent" packets are used simply to "push" the scheduler along more accurately by giving the appearence that a next packet is waiting to be sent and to provide a valid timestamp for that packet.

Parameters:
stampTimestamp for expected send time of packet.
dataValue or NULL if special "silent" packet.
lenMay be 0 to indicate a default by payload type.
bool OutgoingDataQueue::removeContributor ( uint32  csrc)

Remove CSRC from the list of contributors.

Remove output queue CryptoContext.

The endQueue method (provided by RTPQueue) also deletes all registered CryptoContexts.

Parameters:
ccPointer to initialized CryptoContext to remove.
void OutgoingDataQueue::sendImmediate ( uint32  stamp,
const unsigned char *  data = NULL,
size_t  len = 0 
)

This is used to create a data packet and send it immediately.

Sometimes a "NULL" or empty packet will be used instead, and these are known as "silent" packets. "Silent" packets are used simply to "push" the scheduler along more accurately by giving the appearence that a next packet is waiting to be sent and to provide a valid timestamp for that packet.

Parameters:
stampTimestamp immediate send time of packet.
dataValue or NULL if special "silent" packet.
lenMay be 0 to indicate a default by payload type.
virtual void OutgoingDataQueue::setControlPeer ( const InetAddress &  host,
tpport_t  port 
) [inline, protected, virtual]

Reimplemented in RTPDuplex.

Set the "expired" timer for expiring packets pending in the send queue which have gone unsent and are already "too late" to be sent now.

Parameters:
totimeout to expire unsent packets in milliseconds.
void OutgoingDataQueue::setInitialTimestamp ( uint32  ts) [inline, protected]
void OutgoingDataQueue::setMark ( bool  mark) [inline]

Set marker bit for the packet in which the next data provided will be send.

When transmitting audio, should be set for the first packet of a talk spurt. When transmitting video, should be set for the last packet for a video frame.

Parameters:
markMarker bit value for next packet.
void OutgoingDataQueue::setNextSeqNum ( uint32  seqNum) [inline, protected]

For thoses cases in which the application requires a method to set the sequence number for the outgoing stream (such as for implementing the RTSP PLAY command).

Parameters:
seqNumnext sequence number to be used for outgoing packets.

Set ouput queue CryptoContext.

The endQueue method (provided by RTPQueue) deletes all registered CryptoContexts.

Parameters:
ccPointer to initialized CryptoContext.
void OutgoingDataQueue::setPadding ( uint8  paddinglen) [inline]

Set padding.

All outgoing packets will be transparently padded to a multiple of paddinglen.

Parameters:
paddinglenpad packets to a length multiple of paddinglen.
size_t OutgoingDataQueue::setPartial ( uint32  timestamp,
unsigned char *  data,
size_t  offset,
size_t  max 
)

Set partial data for an already queued packet.

This is often used for multichannel data.

Parameters:
timestampTimestamp of packet.
dataBuffer to copy from.
offsetOffset to copy from.
maxMaximum data size.
Returns:
Number of packet data bytes set.

Set the default scheduling timeout to use when no data packets are waiting to be sent.

Parameters:
totimeout in milliseconds.

Member Data Documentation

Mutex OutgoingDataQueue::cryptoMutex [mutable, protected]

The documentation for this class was generated from the following file: